BATTERIES
AND ACCESSORIES
www.JohnDeere.com
www.JohnDeere.ca
2 3
CONTENTS
John Deere Battery Lineup � � � � � � � � � � � � � � � � � � � � � � � � 4
StrongBox™ Batteries � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
StrongBox™ Tiered Portfolio � � � � � � � � � � � � � � � � � � � � � � � 8
By Application
Original Equipment � � � � � � � � � � � � � � � � � � � � � � � � � 10
Standard-Duty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �15
Truck & SUV � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20
By BCI Group Listing � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
By Physical Size � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 26
Testing Equipment ������������������������������30
Warranty Information ���������������������������32
Battery Safety and Installation ��������������������34
Recommended Charging Procedures ���������������36
Merchandising Racks ����������������������������38
Battery Chargers ��������������������������������40
Battery Maintainers �����������������������������42
Battery Jump Starters ���������������������������43
PowerUp!™ Consumer Electronics �����������������47
Battery Cleaning Products and Accessories ���������48
Booster Cables and Clamps �����������������������49
Consider John Deere your one-stop shop for batteries� We offer choice when it
comes to batteries� John Deere StrongBox™ Original Equipment is our premium-
quality battery that meets the original factory specications for all John Deere
equipment� John Deere StrongBox Standard-Duty is an alternative lower-
specication battery that is comparable to most competitive brands in the market
today� We also offer a full line of accessories including cables, terminals, corrosion-
prevention products, and more� And, when a battery wears down, our battery
chargers will have you up and running in no time�
BATTERIES FOR ALL APPLICATIONS
4 5
JOHN DEERE BATTERY LINEUP
FEATURE COMPARISON
COMMERCIAL BATTERIES
Ideal for ag, construction, and off-road,
these commercial-grade designs feature
heavy-duty poly case and cover, plate
anchoring, and plate protection to
prevent vibration damage and extend
performance and life�
LAWN AND GARDEN BATTERIES
Top cranking performance for engines
up to 40 horsepower with reliability that
lasts from season to season� Outdoor-
tough poly case and cover, advanced
grid alloy and maintenance-free design
combines convenience with a power that
you can depend on start-after-start�
AUTOMOTIVE BATTERIES
High performance starting power in
all climates and conditions� Superior
plate and grid design withstand high
under-hood temperatures and the brutal
cold – all while providing long-lasting
maintenance-free battery life�
MARINE BATTERIES
Available for Deep Cycle applications
with features such as thick, reinforced
plates designed for deep discharges,
cycling, and long hours of trolling�
Dual terminals with stainless steel
connections allow multiple hook-ups
and resist power-robbing corrosion�
GOLF CART AND ELECTRIC
VEHICLE BATTERIES
Experience more power on the green
and less maintenance in-between with
high-density plates and reinforced grid
design to maximize continual deep cycle
performance� Special manufacturing
features signicantly reduce time-
consuming battery maintenance and
frequent watering while delivering the
industry’s most trusted performance�
Whether you need a
John Deere Original
Equipment or a Standard-
Duty battery, we have the
battery for every need.
StrongBox™ Design Feature
Original
Equipment
Standard-Duty Benet
Wet (Activated) Battery
n n
Customer convenience
Meets factory specications
n
John Deere Factory tested
and approved
Anchored Plates
n*
Superior vibration protection
Superior Cold Cranking Amps
n
Increased power in cold conditions
Maintenance-free
n n
Reduced need to replenish
water during normal service
*Applies to most commercial-grade batteries�
6 7
John Deere Factory Tested
to ensure batteries withstand
rigorous off-road and harsh
conditions�
Faster starts and power ow
efciencies by an intentional
radial plate design�
Increased durability through
a positive punched-grid design
which prevents corrosion and
electrical shorts�
Extended life created by small
grid windows to improve active
material retention�
Withstands vibration and
prolongs life with a heavy-duty
polypropylene case and cover,
and with anchored plates in most
commercial grade batteries�
Maintenance-free — no need to
add water during normal service
for customer convenience�
Advanced, maintenance-free technology perfect for heavy- and
light-duty farm, ranch, construction, utility, and lawn and garden
equipment� Maintenance-free Original Equipment batteries are
designed and tested for high heat and intense vibration in off-
road conditions�
STRONGBOX™
ORIGINAL EQUIPMENT
Tested in John Deere equipment
by our engineers to meet the
demanding machine specications
of your equipment�
For all makes of agricultural, commercial, automotive,
light truck, SUV, lawn and garden, utility vehicle,
golf cart, electric vehicle, and marine equipment�
STRONGBOX™
STANDARD-DUTY
Standard-Duty batteries offer
customers an economical alternative
in lighter-use situations�
Backed by the John Deere Warranty.
Industry Tested to meet minimum
specications for all-make applications.
Withstands vibration and prolongs life
with a heavy-duty polypropylene case
and cover�
Prevents corrosion and electrical
shorts with envelope plate separators�
Extended life created by small
grid windows to improve active
material retention�
Backed by the John Deere Warranty.
Tested to the extreme,
to handle the extreme.
8 9
BCI Brand Part Number Volts CCA RC Ref. AH Warranty Core Units Length Width Height
U1 Original Equipment TY25221B 12 350 38 30 6 0.5 7
33
/
4 4 in. (197 mm) 5
33
/
16 16 in. (132 mm) 7
55
/
16 16 in. (186 mm)
U1 Standard-Duty TY25878B 12 300 34 25 6 0.5 7
33
/
4 4 in. (197 mm) 5
33
/
16 16 in. (132 mm) 7
55
/
16 16 in. (186 mm)
3ET Original Equipment TY24341B 12 620 120 72 12 1.5 19
55
/
8 8 in. (491 mm) 4
33
/
8 8 in. (111 mm) 9
1313
/
16 16 in. (249 mm)
3ET Standard-Duty TY27794B 12 460 120 70 9 1.5 19
55
/
8 8 in. (491 mm) 4
33
/
8 8 in. (111 mm) 9
1313
/
16 16 in. (249 mm)
4D Original Equipment TY23020B 12 1400 410 190 12 3.0 20
11
/
2 2 in. (521 mm) 8
11
/
2 2 in. (216 mm) 10 in. (254 mm)
4D Original Equipment TY21754B 12 1050 290 135 12 3.0 20
11
/
2 2 in. (521 mm) 8
11
/
2 2 in. (216 mm) 10 in. (254 mm)
4DLT Original Equipment TY24381B 12 1000 220 132 12 1.5 20 in. (508 mm) 8
11
/
8 8 in (206 mm) 8 in. (203 mm)
4DLT Standard-Duty TY27829B 12 860 235 120 9 1.5 20 in. (508 mm) 8
11
/
4 4 in (209 mm) 8 in. (203 mm)
5D Original Equipment TY23025B 6 1000 300 180 12 1.5 13
33
/
44 in. (349 mm) 7
11
/
88 in. (181 mm) 9
33
/
88 in. (238 mm)
5D Standard-Duty TY27793B 6 880 250 130 6 1.5 13
11
/
22 in. (343 mm) 7
11
/
88 in. (181 mm) 9
33
/
88 in. (238 mm)
22NF Original Equipment TY26498B 12 500 75 45 12 1.0 9
11
/
2 2 in. (241 mm) 6
77
/
88 in. (175 mm) 9
11
/
22 in. (241 mm)
22NF Standard-Duty TY27798B 12 360 58 35 6 1.0 9
11
/
2 2 in. (241 mm) 5
11
/
22 in. (140 mm) 9 in. (229 mm)
31 Original Equipment TY25879B 12 950 175 90 20 1.5 13 in. (330 mm) 6
33
/
4 4 in. (171 mm) 9
11
/
22 in. (241 mm)
31 Standard-Duty TY27796B 12 925 170 90 18 1.5 13 in. (330 mm) 6
33
/
4 4 in. (171 mm) 9
11
/
22 in. (241 mm)
31 Original Equipment TY25803B 12 760 170 85 18 1.5 13 in. (330 mm) 6
33
/
4 4 in. (171 mm) 9
11
/
22 in. (241 mm)
31T Original Equipment TY24546B 12 950 175 90 20 1.5 13 in. (330 mm) 6
33
/
4 4 in. (171 mm) 9
11
/
22 in. (241 mm)
31T Standard-Duty TY27795B 12 925 170 90 18 1.5 13 in. (330 mm) 6
33
/
4 4 in. (171 mm) 9
11
/
22 in. (241 mm)
34 Original Equipment TY26442B 12 800 115 65 15 1.0 10
33
/
4 4 in. (273 mm) 6
77
/
88 in. (175 mm) 8 in. (203 mm)
34 Standard-Duty TY27797B 12 690 110 60 12 1.0 10
33
/
4 4 in. (273 mm) 6
77
/
88 in. (175 mm) 8 in. (203 mm)
51 Original Equipment TY25876B 12 500 75 45 18 1.0 9
33
/
88 in. (238 mm) 5 in. (127 mm) 8
33
/
44 in. (222 mm)
51 Standard-Duty TY27806B 12 425 70 40 15 1.0 9
33
/
88 in. (238 mm) 5 in. (127 mm) 8
33
/
44 in. (222 mm)
STRONGBOX™ TIERED PORTFOLIO
With the updated portfolio, John Deere still offers a tiered option for batteries.
The StrongBox™ Original Equipment brand replaces what was the StrongBox™ brand, while the
StrongBox™ Standard-Duty line replaces the Performance brand. The same features and benets
of each still apply with changes to CCA and warranty, offering customers a tangible difference
between the batteries�
StrongBox™ Original Equipment StrongBox™ Standard-Duty
John Deere factory specications (Meets specication, t, form, function)
Higher CCA
Longer Warranty*
Heavy-duty equipment
Premium battery
Previously StrongBox™
Industry standard specications
Industry CCA
Industry Warranty*
Light-duty / older equipment
Economical alternative
Previously Performance
*in most cases
10 11
Part Number TY21737B TY24341B TY21734B TY23020B TY21754B TY24381B TY23025B TY21764B
BCI 3EH 3ET 4 4D 4D 4DLT 5D 24
Volts 6 12 6 12 12 12 6 12
CCA 850 620 975 1400 1050 1000 1000 550
RC 250 120 250 410 290 220 300 90
Ref. AH 168 72 125 190 135 132 180 50
Terminal Type
*
A A A A A A A A
Length 19
11
/
4 4 in. (489 mm) 19
55
/
88 in. (491 mm) 12
11
/
22 in. (318 mm) 20
11
/
22 in. (521 mm) 20
11
/
22 in. (521 mm) 20 in. (508 mm) 13
33
/
44 in. (349 mm) 10
33
/
44 in. (273 mm)
Width 4
11
/
44 in. (108 mm) 4
33
/
88 in. (111 mm) 6
77
/
88 in. (175 mm) 8
11
/
22 in. (216 mm) 8
11
/
22 in. (216 mm) 8
11
/
88 in. (206 mm) 7
11
/
88 in. (181 mm) 6
33
/
44 in. (171 mm)
Height 10 in. (254 mm) 9
1313
/
1616 in. (249 mm) 9
11
/
22 in. (241 mm) 10 in. (254 mm) 10 in. (254 mm) 8 in. (203 mm) 9
33
/
88 in. (238 mm) 9 in. (229 mm)
Core Units
*
1.5 1.5 1.5 3.0 3.0 1.5 1.5 1.0
Warranty (month) 12 12 12 12 12 12 12 18
STRONGBOX™ ORIGINAL EQUIPMENT
HEAVY-DUTY COMMERCIAL
All of our batteries are built to tough
John Deere specications, but they
t most any brand of vehicle or
equipment� And, they're backed by
an excellent John Deere warranty�
BCI group size: Battery dimensions and terminal
conguration
CCA: Amp rating at 0 degrees F
RC: Reserve capacity in minutes at a 25 amp load
TERMINALS
Use a variety of terminals according to the demands of each battery application�
The various types are shown here:
A = SAE Automotive T = Threaded Post X = U1 Lug Post
S = Side Terminal U = Dual Terminal
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
Warranty Code:
Number of months for free replacement
*Recycling credit units
Built and tested for real conditions. Yours.
12 13
WHY DO BATTERIES FAIL?
The top three reasons are:
1� Continuous use in extreme heat applications
2� Vibration due to rough off-road conditions
causes broken welds
3� Lack of seasonal maintenance such as storing a
battery in the winter months without a maintainer
DID YOU KNOW?
Over 60% of batteries submitted on a warranty claim,
are discharged batteries that just need a boost.
TO PROLONG BATTERY LIFE:
– Check batteries every spring and fall for leakage,
state-of-charge, and loose or frayed wires�
Ensure terminals are clean of corrosion�
– Always use the right battery type for the
application at hand�
– Disconnect the battery ground cable if equipment
will not be used for a long time� This will reduce
power drainage and help prolong battery life�
– Use of a John Deere battery maintainer safely
charges most batteries that require long
storage periods�
See page 42 for battery maintainer options.
Part Number TY25272B TY21741B TY24546B TY25803B TY25879B TY26442B TY21748B TY26773B TY26782B
BCI 27 30H 31T 31 31 34 8D D1 D4
Volts 12 12 12 12 12 12 12 12 12
CCA 675 650 950 760 950 800 1400 800 1150
RC 120 150 175 170 175 115 440 180 300
Ref. AH 65 65 90 85 90 65 195 110 154
Terminal Type
*
A A T A A A A A A
Length 12 in. (305 mm) 13 in. (330 mm) 13 in. (330 mm) 13 in. (330 mm) 13 in. (330 mm) 10
33
/
44 in. (273 mm) 20
33
/
44 in. (527 mm) 16
11
/
44 in. (413 mm) 20 in. (508 mm)
Width 6
33
/
44 in. (171 mm) 6
33
/
44 in. (171 mm) 6
33
/
44 in. (171 mm) 6
33
/
44 in. (171 mm) 6
33
/
44 in. (171 mm) 6
77
/
88 in. (175 mm) 11 in. (279 mm) 6
1313
/
1616 in. (175 mm) 7
77
/
1616 in. (189 mm)
Height 9 in. (229 mm) 9
11
/
22 in. (241 mm) 9
11
/
22 in. (241 mm) 9
11
/
22 in. (241 mm) 9
11
/
22 in. (241 mm) 8 in. (203 mm) 10 in. (254 mm) 8
1111
/
1616 in. (220 mm) 8
1313
/
1616 in. (224 mm)
Core Units 1.0 1.5 1.5 1.5 1.5 1.0 3.0 1.5 3.0
Warranty (month) 18 18 20 18 20 15 12 6 12
STRONGBOX™ ORIGINAL EQUIPMENT
HEAVY-DUTY COMMERCIAL
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
Warranty Code:
Number of months for free replacement
Vibration is a leading cause of battery failure.
That's why extensive testing of John Deere
StrongBox™ Original Equipment batteries
simulate rough, real-life situations. Stick with
the John Deere factory tested and approved
battery to keep you running.
TY25803B
14 15
Part Number TY26783B TY25881B
BCI D5 45
Volts 12 12
CCA 1400 480
RC 380 65
Ref. AH 180 30
Terminal Type
*
A A
Length 20 in. (508 mm) 9
33
/
88 in. (238 mm)
Width 8
33
/
44 in. (222 mm) 5
11
/
22 in. (140 mm)
Height 8
1313
/
1616 in. (224 mm) 9 in. (229 mm)
Core Units 3.0 1.0
Warranty (month) 12 12
TY27472B TY26498B TY25876B TY27831B TY25221B TY27365B
47/H5 22NF 51 51R U1 GC2H
12 12 12 12 12 6
650 500 500 500 350 N/A
100 75 75 75 38 255 Ah
60 45 45 45 30 Ref. 20HR Ah 255
A A A A X U
9
99
/
1616
in. (243 mm) 9
11
/
22 in. (241 mm) 9
33
/
88 in. (238 mm) 9
33
/
88 in. (238 mm) 7
33
/
44 in. (197 mm) 10
11
/
44 in. (260 mm)
6
77
/
88 in. (175 mm) 6
77
/
88 in. (175 mm) 5 in. (127 mm) 5 in. (127 mm) 5
33
/
1616 in. (132 mm) 7
11
/
88 in. (181 mm)
7
11
/
22 in. (191 mm) 9
11
/
22 in. (241 mm) 8
33
/
44 in. (222 mm) 8
33
/
44 in. (222 mm) 7
55
/
1616 in. (186 mm) 11
77
/
88 in. (302 mm)
1.0 1.0 1.0 1.0 0.5 1.5
20 12 18 18 6 6
STRONGBOX™ ORIGINAL EQUIPMENT
HEAVY-DUTY COMMERCIAL
STRONGBOX™ ORIGINAL EQUIPMENT
TURF & UTILITY
Our line of lawn and garden batteries include an option
for every budget� Choose the Original Equipment
versions for heavy-duty use, such as commercial mowing
or our Standard-Duty options for lighter use applications�
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
Warranty Code:
Number of months for free replacement
16 17
Part Number TY21731B TY27794B TY27829B TY27793B TY6192B TY27798B TY27800B TY27805B
BCI 1 3ET 4DLT 5D 22F 22NF 26R 27
Volts 6 12 12 6 12 12 12 12
CCA 640 460 860 880 425 360 540 600
RC 130 120 235 250 65 58 80 150
Ref. AH 90 70 120 130 35 35 50 80
Terminal Type
*
A A A A A A A A,T
Length 9
in. (229 mm) 19
55
/
88 in. (491 mm) 20 in. (508 mm) 13
11
/
22 in. (343 mm) 9
33
/
88 in. (238 mm) 9
11
/
22 in. (241 mm) 8
33
/
44 in. (222 mm) 12
33
/
44 in. (323 mm)
Width 6
77
/
88 in. (175 mm) 4
33
/
88
in. (111 mm) 8
11
/
44 in. (209 mm) 7
11
/
88 in. (181 mm) 6
33
/
44 in. (171 mm) 5
11
/
22 in. (140mm) 6
33
/
44 in. (171 mm) 6
33
/
44 in. (171 mm)
Height 8
33
/
44 in. (222 mm) 9
1313
/
1616 in. (249 mm) 8 in. (203 mm) 9
33
/
88 in. (238 mm) 8
11
/
44 in. (210 mm) 9 in. (229mm) 8 in. (203 mm) 9
33
/
88 in. (238 mm)
Core Units 1.0 1.5 1.5 1.5 1.0 1.0 1.0 1.0
Warranty (month) 12 9 9 6 12 6 20 12
STRONGBOX™ STANDARD-DUTY
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
Warranty Code:
Number of months for free replacement
TY27829B TY27793B
18 19
Part Number TY27795B TY27796B TY27797B TY27474B TY27806B TY25878B
BCI 31T 31 34 49/H8 51 U1
Volts 12 12 12 12 12 12
CCA 925 925 690 900 425 300
RC 170 170 110 150 70 34
Ref. AH 90 90 60 80 40 25
Terminal Type
*
T A A A A X
Length 13 in. (330 mm) 13 in. (330 mm) 10
33
/
44 in. (273 mm) 13
1515
/
1616
in. (354 mm) 9
33
/
88 in. (238 mm) 7
¾ in. (197 mm)
Width 6
33
/
44 in. (171 mm) 6
33
/
44 in. (171 mm) 6
77
/
88 in. (175 mm) 6
77
/
88 in. (175 mm) 5 in. (127 mm) 5
33
/
1616 in. (132 mm)
Height 9
11
/
22 in. (241 mm) 9
11
/
22 in. (241 mm) 8 in. (203 mm) 7
11
/
22 in. (191 mm) 8
¾ in. (222 mm) 7
55
/
1616 in. (186 mm)
Core Units 1.5 1.5 1.0 1.0 1.0 0.5
Warranty (month) 18 18 12 20 15 6
STRONGBOX™ STANDARD-DUTY
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
Warranty Code:
Number of months for free replacement
Return to John Deere dealer for recycling credit.
To simplify the battery warranty, StrongBox™
Standard-Duty battery warranty claims can now be
submitted through the John Deere warranty system�
20 21
Part Number TY27799B TY24394B TY27473B TY24932B
BCI 24F 27F 48/H6 65
Volts 12 12 12 12
CCA 700 710 730 850
RC 120 120 115 150
Ref. AH 70 65 70 80
Terminal Type
*
A A A A
Length 10
33
/
44 in. (273 mm) 12
33
/
88 in. (314 mm) 11
in. (279 mm) 12 in. (305 mm)
Width 6
33
/
44 in. (171 mm) 6
33
/
44 in. (171 mm) 6
77
/
88 in. (175 mm) 7
33
/
88 in. (187 mm)
Height 9 in. (229 mm) 9 in. (229 mm) 7
11
/
22 in. (191 mm) 7
55
/
88 in. (194 mm)
Core Units 1.0 1.0 1.0 1.0
Warranty (month) 30 30 30 30
STRONGBOX™ TRUCK & SUV
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
S = side terminal
Warranty Code:
Number of months for free replacement
TY24944B TY24937B TY27804B
75 78DT 94R/H7
12 12 12
650 800 790
90 115 130
58 65 80
S A,S A
9 ¾ in. (248 mm) 10 ¾ in. (273 mm) 12
77
/
1616 in. (316 mm)
7 in. (178 mm) 7 in. (178 mm) 6
77
/
88 in. (175 mm)
7 ¼ in. (184 mm) 8 in. (203 mm) 7
11
/
22 in. (191 mm)
1.0 1.0 1.0
30 30 30
Did you know a lead acid battery is
99% recyclable?
But remember Lithium Ion batteries
CANNOT be placed in the core pick-up
pile� Lithium ion batteries MUST be
recycled separately�
22 23
BCI Part Number Volts CCA RC Ref. AH Terminal Type StrongBox™ Label Size (in.) Size (mm) Core Units Waranty (month)
L W H L W H
1 TY21731B 6 640 130 90 A Standard-Duty 9 6
77
/
88 8
33
/
44 229 175 222 1.0 12
3EH TY21737B 6 850 250 168 A Original Equipment 19
11
/
44 4
11
/
44 10 489 108 254 1.5 12
3ET TY24341B 12 620 120 72 A Original Equipment 19
55
/
88 4
33
/
88 9
1313
/
1616 491 111 249 1.5 12
3ET TY27794B 12 460 120 70 A Standard-Duty 19
55
/
88 4
33
/
88 9
1313
/
1616 491 111 249 1.5 9
4 TY21734B 6 975 250 125 A Original Equipment 12
11
/
22 6
77
/
88 9
11
/
22 318 175 241 1.5 12
4D TY21754B 12 1050 290 135 A Original Equipment 20
11
/
22 8
11
/
22 10 521 216 254 3.0 12
4D TY23020B 12 1400 410 190 A Original Equipment 20
11
/
22 8
11
/
22 10 521 216 254 3.0 12
4DLT TY24381B 12 1000 220 132 A Original Equipment 20 8
11
/
88 8
11
/
88 508 206 203 1.5 12
4DLT TY27829B 12 860 235 120 A Standard-Duty 20 8
11
/
44 8 508 209 203 1.5 9
5D TY23025B 6 1000 300 180 A Original Equipment 13
11
/
22 7
11
/
88 9
33
/
88 343 181 238 1.5 12
5D TY27793B 6 880 250 130 A Standard-Duty 13
33
/
44 7
11
/
88 9
33
/
88 349 181 238 1.5 6
8D TY21748B 12 1400 440 195 A Original Equipment 20
33
/
44 11 10 527 279 254 3.0 12
22F TY6192B 12 425 65 35 A Standard-Duty 9
33
/
88 6
33
/
44 8
11
/
44 238 171 210 1.0 12
22NF TY26498B 12 500 75 45 A Original Equipment 9
11
/
22 6
77
/
88 9
11
/
22 241 175 241 1.0 12
22NF TY27798B 12 360 58 35 A Standard-Duty 9
11
/
22 5
11
/
22 9 241 140 229 1.0 6
24 TY21764B 12 550 90 50 A Original Equipment 10
33
/
44 6
33
/
44 9 273 171 229 1.0 18
24F TY27799B 12 700 120 70 A Truck/SUV 10
33
/
44 6
33
/
44 9 273 171 229 1.0 30
26R TY27800B 12 540 80 50 A Standard-Duty 8
33
/
44 6
33
/
44 8 222 171 203 1.0 20
27 TY25272B 12 675 120 65 A Original Equipment 12 6
33
/
44 9 305 171 229 1.0 18
27 TY27805B 12 600 150 80 A,T Standard-Duty 12
33
/
44 6
33
/
44 9
33
/
88 323 171 238 1.0 12
27F TY24394B 12 710 120 65 A Truck/SUV 12
33
/
88 6
33
/
44 9 314 171 229 1.0 30
30H TY21741B 12 650 150 65 A Original Equipment 13 6
33
/
44 9
11
/
22 330 171 241 1.5 18
31 TY25803B 12 760 170 90 A Original Equipment 13 6
33
/
44 9
11
/
22 330 171 241 1.5 18
31 TY25879B 12 950 175 90 A Original Equipment 13 6
33
/
44 9
11
/
22 330 171 241 1.5 20
31 TY27796B 12 925 170 90 A Standard-Duty 13 6
33
/
44 9
11
/
22 330 171 241 1.5 18
31T TY24546B 12 950 175 90 T Original Equipment 13 6
33
/
44 9
11
/
22 330 171 241 1.5 20
31T TY27795B 12 925 170 90 T Standard-Duty 13 6
33
/
44 9
11
/
22 330 171 241 1.5 18
34 TY26442B 12 800 115 65 A Original Equipment 10
33
/
44 6
77
/
88 8 273 175 203 1.0 15
34 TY27797B 12 690 110 60 A Standard-Duty 10
33
/
44 6
77
/
88 8 273 175 203 1.0 12
45 TY25881B 12 480 65 30 A Original Equipment 9
33
/
88 5
11
/
22 9 238 140 229 1.0 12
BATTERIES BY BCI GROUP LISTING
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
Warranty Code:
Number of months for free replacement
24 25
BCI Part Number Volts CCA RC Ref. AH Terminal Type StrongBox™ Label Size (in.) Size (mm) Core Units Waranty (month)
L W H L W H
47/H5 TY27472B 12 650 100 60 A Original Equipment 9
99
/
1616 6
77
/
88 7
11
/
22 243 175 191 1.0 20
48/H6 TY27473B 12 730 115 70 A Truck/SUV 11 6
77
/
88 7
11
/
22 279 175 191 1.0 30
49/H8 TY27474B 12 900 150 80 A Standard-Duty 13
1515
/
1616 6
77
/
88 7
11
/
22 354 175 191 1.0 20
51 TY25876B 12 500 75 45 A Original Equipment 9
33
/
88 5 8
33
/
44 238 127 222 1.0 18
51 TY27806B 12 425 70 40 A Standard-Duty 9
33
/
88 5 8
33
/
44 238 127 222 1.0 15
51R TY27831B 12 500 75 45 A Original Equipment 9
33
/
88 5 8
33
/
44 238 127 222 1.0 18
65 TY24932B 12 850 150 80 A Truck/SUV 12 7
33
/
88 7
55
/
88 305 187 194 1.0 30
75 TY24944B 12 650 90 58 S Truck/SUV 9
33
/
44 7 7
11
/
44 248 178 184 1.0 30
78DT TY24937B 12 800 115 65 A,S Truck/SUV 10
33
/
44 7 8 273 178 203 1.0 30
94R/H7 TY27804B 12 790 130 80 A Truck/SUV 12
77
/
1616 6
77
/
88 7
11
/
22 316 175 191 1.0 30
D1 TY26773B 12 800 180 110 A Original Equipment 16
11
/
44 6
1313
/
1616 8
1111
/
1616 413 175 220 2.0 6
D4 TY26782B 12 1150 300 154 A Original Equipment 20 7
77
/
1616 8
1313
/
1616 508 189 224 3.0 12
D5 TY26783B 12 1400 380 180 A Original Equipment 20 8
33
/
44 8
1313
/
1616 508 222 224 3.0 12
GCH2 TY27365B 6 N/A 255 Ah Ref. 20HR Ah 255 U Original Equipment 10
11
/
44 7
11
/
88 11
77
/
88 260 181 302 1.5 6
U1 TY25221B 12 350 38 30 X Original Equipment 7
33
/
44 5
33
/
1616 7
55
/
1616 197 132 186 0.5 6
U1 TY25878B 12 300 34 25 X Standard-Duty 7
33
/
44 5
33
/
1616 7
55
/
1616 197 132 186 0.5 6
Motorcycle /
Powersport / AGM
TY27801B 12 50 N/A Ref. 10HR Ah 3 A N/A 4
33
/
44 2
77
/
88 3
1111
/
1616 120 73 94 0.5 6
Powert / AGM TY27802B 12 N/A N/A Ref.20HR Ah 12 A N/A 6 3
77
/
88 3
33
/
44 152 98 95 0.5 6
BATTERIES BY BCI GROUP LISTING
TY24341B
Very popular seasonal-use battery�
BATTERY SAFETY
When handling batteries, always wear proper
eye, face, and hand protection� Remember,
never remove a damaged vent cap or lean
over a battery when charging or testing�
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
S = side terminal
U = dual post
Warranty Code:
Number of months for free replacement
26 27
BATTERIES BY PHYSICAL SIZE
Size (in.) Size (mm)
Part Number BCI Volts CCA RC
Ref. AH StrongBox™ Label Terminal Type Core Units Waranty (month)
L W H L W H
4
33
/
44 2
77
/
88 3
1111
/
1616 120 73 94
TY27801B
Motorcycle /
Powersport /
AGM
12 50 N/A Ref.10HR Ah 3 N/A
A 0.5 6
6 3
77
/
88 3
33
/
44 152 98 95
TY27802B
Powert / AGM
12 N/A N/A Ref.20HR Ah 12 N/A A 0.5 6
7
33
/
44 5
33
/
1616 7
55
/
1616 197 132 186 TY25221B U1 12 350 38 30 Original Equipment X 0.5 6
7
33
/
44 5
33
/
1616 7
55
/
1616 197 132 186 TY25878B U1 12 300 34 25 Standard-Duty X 0.5 6
8
33
/
44 6
33
/
44 8 222 171 203 TY27800B 26R 12 540 80 50 Standard-Duty A 1.0 20
9 6
77
/
88 8
33
/
44 229 175 222 TY21731B 1 6 640 130 90 Standard-Duty A 1.0 12
9
33
/
88 6
33
/
44 8
11
/
44 238 171 210 TY6192B 22F 12 425 65 35 Standard-Duty A 1.0 12
9
33
/
88 5
11
/
22 9 238 140 229 TY25881B 45 12 480 65 30 Original Equipment A 1.0 12
9
33
/
88 5 8
33
/
44 238 127 222 TY25876B 51 12 500 75 45 Original Equipment A 1.0 18
9
33
/
88 5 8
33
/
44 238 127 222 TY27806B 51 12 425 70 40 Standard-Duty A 1.0 15
9
33
/
88 5 8
33
/
44 238 127 222 TY27831B 51R 12 500 75 45 Original Equipment A 1.0 18
9
11
/
22 6
77
/
88 9
11
/
22 241 175 241 TY26498B 22NF 12 500 75 45 Original Equipment A 1.0 12
9
11
/
22 5
11
/
22 9 241 140 229 TY27798B 22NF 12 360 58 35 Standard-Duty A 1.0 6
9
33
/
44 7 7
11
/
44 248 178 184 TY24944B 75 12 650 90 58 Truck/SUV S 1.0 30
9
99
/
1616 6
77
/
88 7
11
/
22 243 175 191 TY27472B 47/H5 12 650 100 60 Standard-Duty A 1.0 20
10
11
/
44 7
11
/
88 11
77
/
88 260 181 302 TY27365B GCH2 6 N/A N/A Ref. 20HR Ah 255 Original Equipment U 1.5 6
10
33
/
44 6
33
/
44 9 273 171 229 TY21764B 24 12 550 90 50 Original Equipment A 1.0 18
10
33
/
44 6
33
/
44 9 273 171 229 TY27799B 24F 12 700 120 70 Truck /SUV A 1.0 30
10
33
/
44 6
77
/
88 8 273 175 203 TY26442B 34 12 800 115 65 Original Equipment A 1.0 15
10
33
/
44 6
77
/
88 8 273 175 203 TY27797B 34 12 690 110 60 Standard-Duty A 1.0 12
10
33
/
44 7 8 273 178 203 TY24937B 78DT 12 800 115 65 Truck/SUV A,S 1.0 30
11 6
77
/
88 7
11
/
22 279 175 191 TY27473B 48/H6 12 730 115 70 Truck/SUV A 1.0 30
12 6
33
/
44 9 305 171 229 TY25272B 27 12 675 120 65 Original Equipment A 1.0 18
12 7
33
/
88 7
55
/
88 305 187 194 TY24932B 65 12 850 150 80 Truck/SUV A 1.0 30
12
33
/
88 6
33
/
44 9 314 171 229 TY24394B 27F 12 710 120 65 Truck/SUV A 1.0 30
12
77
/
1616 6
77
/
88 7
11
/
22 316 175 191 TY27804B 94R/H7 12 790 103 80 Truck/SUV A 1.0 30
12
11
/
22 6
77
/
88 9
11
/
22 318 175 241 TY21734B 4 6 975 250 125 Original Equipment A 1.5 12
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
S = side terminal
Warranty Code:
Number of months for free replacement
28 29
Size (in.) Size (mm)
Part Number BCI Volts CCA RC
Ref. AH StrongBox™ Label Terminal Type Core Units Waranty (month)
L W H L W H
12
33
/
44 6
33
/
44 9
33
/
88 323 171 238 TY27805B 27 12 600 150 80 Standard-Duty A,T 1.0 12
13 6
33
/
44 9
11
/
22 330 171 241 TY21741B 30H 12 650 150 65 Original Equipment A 1.5 18
13 6
33
/
44 9
11
/
22 330 171 241 TY24546B 31T 12 950 175 90 Original Equipment T 1.5 20
13 6
33
/
44 9
11
/
22 330 171 241 TY27995B 31T 12 925 170 90 Standard-Duty T 1.5 18
13 6
33
/
44 9
11
/
22 330 171 241 TY25803B 31 12 760 170 90 Original Equipment A 1.5 18
13 6
33
/
44 9
11
/
22 330 171 241 TY25879B 31 12 950 175 90 Original Equipment A 1.5 20
13 6
33
/
44 9
11
/
22 330 171 241 TY27996B 31 12 925 170 90 Original Equipment A 1.5 20
13
33
/
44 7
11
/
88 9
33
/
88 349 181 238 TY23025B 5D 6 1000 300 180 Original Equipment A 1.5 12
13
11
/
22 7
11
/
88 9
33
/
88 343 181 238 TY27793B 5D 6 880 250 130 Standard-Duty A 1.5 6
13
1515
/
1616 6
77
/
88 7
11
/
22 354 175 191 TY27474B 49/H8 12 900 150 80 Standard-Duty A 1.0 20
16
11
/
44 6
1313
/
1616 8
1111
/
1616 413 175 220 TY26773B D1 12 800 180 110 Original Equipment A 2.0 6
19
11
/
44 4
11
/
44 10 489 108 254 TY21737B 3EH 6 850 250 168 Original Equipment A 1.5 12
19
55
/
88 4
33
/
88 9
1313
/
1616 491 111 249 TY24341B 3ET 12 620 120 72 Original Equipment A 1.5 12
19
55
/
88 4
33
/
88 9
1313
/
1616 491 111 249 TY27794B 3ET 12 460 120 70 Standard-Duty A 1.5 9
20 8
11
/
88 8 508 206 203 TY24381B 4DLT 12 1000 220 132 Original Equipment A 1.5 12
20 8
11
/
44 8 508 209 203 TY27829B 4DLT 12 860 235 120 Standard-Duty A 1.5 9
20 7
77
/
1616 8
1313
/
1616 508 189 224 TY26782B D4 12 1150 300 154 Original Equipment A 3.0 12
20 8
33
/
44 8
1313
/
1616 508 222 224 TY26783B D5 12 1400 380 180 Original Equipment A 3.0 12
20
11
/
22 8
11
/
22 10 521 216 254 TY23020B 4D 12 1400 410 190 Original Equipment A 3.0 12
20
11
/
22 8
11
/
22 10 521 216 254 TY21754B 4D 12 1050 290 135 Original Equipment A 3.0 12
20
33
/
44 11 10 527 279 254 TY21748B 8D 12 1400 440 195 Original Equipment A 3.0 12
BATTERIES BY PHYSICAL SIZE (CONT.)
Terminal Type
A = SAE automotive
A&S = both pillar and side posts
T = threaded post
X = U-1 lug post
Warranty Code:
Number of months for free replacement
30 31
Battery testing —
right at our parts counter�
BATTERY TESTER
BY AUTO METER
SWBVA-200S
TESTING EQUIPMENT
INFRARED PRINTER
AND PROTECTIVE
CARRYING CASE
SWAC-20S
This printer is designed specically
to work with all Auto Meter®
handheld battery testers:
– New improved printer head
– Portable infrared printer
for use with all Auto Meter
handheld testers
– Includes AC power adapter
– Uses standard 58-mm
thermal paper
– Dimensions 6 x 4�5 x 3�5 inch
– Includes cigar lighter
power adapter
– Includes SWAC-19S protective
plastic carrying case
BATTERY TESTER
BY AUTO METER
SWBCT-200J
– BVA handheld testers can test battery, starter, and the
alternator system in 82 seconds
– Advanced DPL technology for true-load results
– Tests most battery and electrical systems
– 64-character backlit LCD screen
– Stores previous 188 tests/easy review
– Customer communication with optional infrared
printer or PC cable
– Reverse polarity protected
Quick testing can determine if a battery needs to be replaced, or if the problem
is a simple one such as a loose cable, corroded terminal, or low electrolyte levels�
Too often, batteries that are simply “rundown” are replaced� Through diagnosis
at the parts counter, this common mistake can be avoided without unnecessary
stress on your wallet�
PROTECTIVE PLASTIC
CARRYING CASE
SWAC-19S
– Fits all Auto Meter handheld testers
– Includes room for the PR-12 Printer,
wall transformer, and other accessories
WARRANTY
The Auto Meter battery tester warranty
is provided by the supplier� The tester,
printer, and case are covered for 12
months against defects and
workmanship, and includes parts and
labor with an exception for the lead and
clamps which are warrantied for 90 days�
WARRANTY PROCEDURE
– Call Auto Meter customer service at
866-883-8378� A service technician
will determine if an on-site solution is
possible, or will provide a Return
Goods Authorization (RGA) number
and instructions on returning the unit
to the Auto Meter Service Center�
– Write the RGA number on the outside
of the shipping box and the
explanatory paperwork�
– Box the unit carefully with sufcient
packing, and include an explanation of
the problem and circumstance, RGA
number, and return address�
– The unit will be repaired or replaced
within two working days and returned
prepaid to the address provided�
This printer is one
smart accessory�
IMPORTANT: Not for use with deep-cycle batteries�
* Limitations: The tester can make determinations on batteries that have low charge within an accuracy rate of 95 percent� However, the deeper a battery
is discharged, the more the ability for the tester to make a determination decreases� If a determination cannot be made, recharging is necessary�
Specications SWBCT-200J SWBVA-200S
Battery Types & Voltage 6 & 12 Volt, Flooded & AGM 6 & 12 Volt, Flooded & AGM
Batttery CCA Range 200-1600 CCCA 100-1600 CCA
Automated Load 120 Amp 120 Amp
Alternator Test 12 & 24 Volt 12 & 24 Volt
Stator Diode Test Yes Yes
Starter Draw Test V-Drop Yes
Voltage Drop Test Automated No
Load Lads 4FT. - 6 Gauge 30", 6FT Gague Adapter
Required for GM Side Post
Field Replaceable Leads Yes Yes
Communications to PC RS-232 via
Optional AC-10 Cable
RS-232 via
Optional AC-10 Cable
Memory 120 Test 188 Test
Language English & Spanish English & Spanish
Operational Temperature 0-120°F 0-120°F
Operational Humidy 0-85% 0-85% - Non Condensing
Internal Battery 9V - DC 9V - DC
Dimesions and Weight 5.9" x 9.6" x 2.1" - 4 lbs 5.9" x 9.6" x 2.1" - 4 lbs
Rubber Boot Yes Yes
DIGITAL TESTER FOR 12-VOLT
BATTERIES/STARTER SYSTEMS/
CHARGING SYSTEMS
SWBT175
– Three testers in one (battery, charging,
and starting)
– Digital display guides you through
the testing process and shows voltage
and CCA
– LED display states:
• OK and recharge
• Recharge and retest
• Weak
• Bad battery
• Error
– For 12-volt SLI and VRLA/AGM/GEL
batteries
– Accepts rating types: CCA, CA, EN,
IEC, DIN, and SAE
– Operating range: 100–1200 CCA (SAE)
– Testing voltage: 7–15 volt
– One-year warranty
32 33
WARRANTY INFORMATION
John Deere warrants to the original purchaser of each
new battery bearing the name John Deere or the
John Deere trademark as follows:
Replacement battery limited warranty — This limited
warranty is applicable to John Deere replacement
batteries with a part number beginning with the
letters “TY”�
The limited warranty on replacement batteries begins
on the date that the battery is activated and/or sold for
replacement purposes�
Note: Dealers should remove date-code circles or placard
tabs (depending on the type of battery) from the battery
top plaque to indicate the warranty starting date.
For an installation of November 2020:
Punch N and 0
N=November
0= last digit of the year
Any battery that becomes unserviceable due to defects
in material or workmanship, not merely discharged, will
be replaced free of charge according to the specic
warranty code for each battery� This does not include
installation costs�
When submitting the battery warranty claim, the dealer
must submit the failed battery part number, not the
replacement battery part number�
To obtain warranty service the purchaser must request
warranty service from a John Deere dealer authorized to
sell John Deere-branded batteries� At the same time, the
purchaser must present the battery with the top placard
intact and the original sales receipt� The purchaser must
also tell the dealer what appears to be wrong with the
battery� Upon completion of warranty service, the
purchaser must, at purchaser’s expense, either pick up
the merchandise or arrange for delivery�
Conditions of non-coverage —
This warranty does not cover:
– Breakage of the container, cover, or terminals
– Depreciation or damage caused by normal wear,
accident, or lack of reasonable and necessary
maintenance
– Use of an electrolyte not recommended by the company
– Transportation, mailing, or service-call charges for
warranty performance
– Batteries that are merely discharged
Neither John Deere nor any afliated companies make
any warranties, representations, or promises as to the
quality or performance of its batteries other than those
set forth herein�
Implied or statutory warranties or conditions of
merchantability and tness for a particular purpose to
the extent applicable shall be limited in duration to the
free replacement period� The only remedies a purchaser
has in connection with the breach or performance of any
warranty on John Deere batteries are those set forth
herein� In no event will the dealer, John Deere, or any
company afliated with John Deere be liable for incidental
or consequential damages�
Note: Some states or provinces may not allow limitations
on how long an implied warranty lasts or on the exclusion
of or limitation of incidental or consequential damages,
so the above limitations and exclusions may not apply to
the purchaser.
The selling dealer makes no warranty of his own on any
battery warranted by John Deere unless he provides the
purchaser a separate written certicate specically
warranting the battery�
The dealer has no authority to make any representation
or promise on behalf of John Deere or to modify the terms
or limitations of this warranty in any way�
Note: The warranty gives a purchaser specic legal
rights, and he/she may also have other rights that
may vary by jurisdiction.
JOHN DEERE AFTERMARKET BATTERIES — U.S. AND CANADA
Use the chart below to determine warranty coverage�
Coverage varies based on the specic battery
you purchased�
Warranty for overseas-produced batteries —
If a foreign-made battery in a foreign-produced piece
of equipment fails, the dealer must refer to the
battery information in the electronic parts catalog
or through PartsEXPERT to nd the appropriate
replacement battery�
When submitting the battery warranty claim, the dealer
must submit the failed battery part number, not the
replacement battery part number�
Date-code markings indicate installation and the
service record on most StrongBox batteries; the top
plaques include removable circles for indicating
delivery or activation date� Also, removable circles
on plaques may indicate the intended usage of the
battery when it is sold�
WARRANTY CODE FREE EXCHANGE
6 6 month
9 9 month
12 12 month
15 15 month
18 18 month
20 20 month
30 30 month
JOHN DEERE STRONGBOX™
BATTERY LIMITED-WARRANTY
COVERAGE CHART — U.S. AND
CANADA
34 35
BATTERY SAFETY AND INSTALLATION
Because batteries contain sulfuric acid and
produce mixtures of hydrogen and oxygen,
failure to use caution when handling them
can or may result in serious injury� The self-
discharge action of a battery generates
hydrogen gas, presenting the potential
to explode even if the battery is not in
operation� Acid can cause serious burns to
your skin through handling� That’s why it’s
important to follow these safety precautions:
STORING BATTERIES
– Always store batteries in a well-ventilated,
open area�
– Check batteries frequently to ensure
there is no acid leakage or corrosion on
the batteries�
– Keep a freshly charged re extinguisher
near any stored batteries�
HANDLING BATTERIES
– Always wear proper eye, face, and hand
protection�
– Keep all sparks, ames, and cigarettes
away from the battery�
– Do not remove damaged vent caps�
– Cover vent caps with a damp cloth to
minimize gas�
– Make sure work area is well ventilated�
– Never lean over a battery when boosting,
testing, or charging it�
INSTALLATION
– Disconnect the ground cable rst (this is usually
the negative cable; however, older vehicles may have
a positive ground)�
– Remove the old battery — note the positions of
the positive (+) terminal and the negative (–) terminal�
Mark the cable for the correct connection to the
new battery�
– Clean the terminals and cable connections with a wire
brush� Broken, frayed, or cut cables should be replaced�
– Install the new battery in the same position as the
old one and secure it with the hold-down assembly�
– Ensure terminals do not touch any metal mounting,
engine, or vehicle body parts�
– Connect the ground cable last to avoid sparks�
Make sure the cables are connected tightly�
BOOSTER-CABLE OPERATION
When jump-starting a battery, always wear proper eye
protection, and never lean over the battery� Do not jump-
start a damaged battery� Inspect both the discharged and
assisting batteries before connecting booster cables� Be sure
vent caps are tight and level� Place a damp cloth over the vent
caps of both batteries� Make certain that the vehicles are not
touch-ing and that both of the ignition switches are turned
to the “OFF” position� Then, follow these steps in order:
– Connect the positive (+) booster cable to the positive (+)
terminal of the discharged battery�
– Connect the other end of the positive (+) cable to the
positive (+) terminal of the assisting battery�
– Connect the negative (–) cable to the negative (–) terminal
of the assisting battery�
– Make the nal connection of the negative (–) cable
to the engine block of the stalled vehicle�
– Start the vehicle and remove the cables in the reverse
order of the connections�
HEAT-SHIELD CAUTION
When a heat shield is used, a slight adjustment may be
needed to accommodate terminal posts� Protective heat
shields around batteries are being used with increasing
frequency to protect the battery from very high
temperatures� Failure to replace the heat shield after
installation of the replacement battery may reduce its
electrical performance life�
CHARGING
Never attempt to charge a battery without rst
reviewing the instructions for using the charger� In
addition to the charger instructions, these general
precautions should be followed:
– Always charge batteries in a well-ventilated area, and
wear proper eye protection�
– Turn the charger and timer to “OFF” before connecting
the leads to the battery to avoid dangerous sparks�
– Never try to charge a visibly damaged or frozen battery�
– Connect the charger leads to the battery: red positive
(+) lead to the positive (+) terminal and black to the
negative (–) terminal� If the battery is still in the vehicle,
connect the negative (–) lead to the engine block to
serve as a ground (if the vehicle is positive grounded,
connect the positive lead to the engine block)�
– Set the timer, turn on the charger, and slowly
increase the charging rate until the desired ampere
value is reached�
– If the battery becomes hot, or if violent gassing or
spewing of electrolyte occurs, reduce the charging
rate or temporarily halt the charger�
– Always turn the charger to “OFF” before removing
the charger leads from the battery to avoid
dangerous sparks�
Follow these guidelines to ensure safe battery installation
and charging, and booster-cable operation�
36 37
RECOMMENDED CHARGING PROCEDURES
DETERMINING STATE-OF-CHARGE
The simplest method to determine the state-of-charge
of a battery is to read the battery “rested” open-circuit
voltage (OCV) with a digital voltmeter� Consider these
facts:
– Rested OCV indicates an undisturbed battery
with no charging or discharging for at least eight
hours or more�
– The use of a hydrometer to read the cell-specic
gravities is encouraged since this complementary
value will aid in battery diagnostics�
– At activation (rst dry-charged battery acid ll), the
OCV is fairly close to the true rested OCV, and no
wait is necessary to determine true state-of-charge�
BATTERY-CHARGING THEORY
The best way to understand how a charger works is to
make the analogy of two tanks connected at the
bottom by a pipe. The tank lled with water represents
the charger, while the empty tank represents the
battery� As the full tank discharges into the empty
tank, its level rises (voltage), while the water ow
through the pipe into the empty tank decreases
(amperage)� The amount of charging amperes (A)
multiplied by time (hours) will provide the battery
capacity in ampere-hours of charge�
During charging, the battery will self-regulate the
charge ow according to the charger output voltage,
which is just as important as the amperage that is
forced into the battery� The voltage must be controlled
and used according to the operator’s needs to avoid
battery damage�
The various voltage levels for batteries and a variety
of chargers are described in the chart at right�
HOW THE CHARGING CURRENT WILL
BEHAVE DURING RECHARGE
The current (amperes) owing into the battery will be
dictated by the battery’s state-of-charge,
temperature, and charging voltage (kept fairly constant
by the charger)�
The current prole will almost invariably follow the
pattern shown at right, according to the state-of-
charge of the battery�
13.5V
12.6V
12.4V
12.2V
16.5V
15.0V
13.0V
12.8V
TYPICAL FULLY CHARGED BATTERY
OPEN-CIRCUIT VOLTAGE (OCV)
TYPICAL DISCHARGED BATTERY
OPEN-CIRCUIT VOLTAGE (OCV)
TYPICAL “FLOAT/TRICKLE-CHARGE”
CHARGER VOLTAGE SETTING
(Used for unattended trickle charging)
TYPICAL “MEDIUM-CHARGE”
CHARGER VOLTAGE SETTING
(Used for NORMAL charging)
TYPICAL “HIGH-CHARGE”
CHARGER VOLTAGE SETTING
(Used for START or short
BOOSTING only)
12.0V
11.7V
25% SOC
0% SOC
100% SOC
50% SOC
75% SOC
(TYPICAL 14V
ALTERNATOR
VOLTAGE)
AMPS
CHARGE
TIME (HOURS)
Normally Discharged
Battery, OCV~12V
Charged
Battery
OCV~12.7V
Deeply Discharged Battery, OCV~Less than 8V
*Rested 8 hours or more OCV (use 1 ⁄2 OCV for 6-volt batteries).
**Based on the 20-hour (ampere hour) capacity�
†
Based on “low-voltage” charger setting
(13�5- to 14-volt charger output)�
The appropriate state-of-charge and approximate time to
complete full charging at 80°F can be determined from the
following table�
BATTERY-CHARGING SCENARIOS
Boost-charging a recently discharged battery
A battery discharged in the past three days can be easily
charged since the materials will respond to charging by
readily converting to their original chemical state� The table
on the previous page may be used as a guideline with
medium settings� High/start-voltage or boost-voltage
settings will accelerate charging, requiring close supervision
to ensure that batteries are not overheating or gassing
excessively� High/start and boost settings must be done in
two-hour intervals until voltage rises to specications.
Boost-charging a rundown (at) battery
Batteries with little or no voltage have little chance for
recuperation, especially if they have remained in this state
for a long period of time�
To charge a battery in this condition, the operator must use
the lowest setting on the charger (low/trickle/oat) and
allow the battery to charge over a 24-hour period�
If the battery resists charge, a high-boost charge may be
attempted for 30 to 60 minutes until the battery begins to
accept charge� After this limited time period, the setting
must be switched to low to avoid excessive overheating�
The operator must make sure the battery is still accepting
charge by watching the needle move above the zero mark�
Once charging is completed, the battery must be tested to
determine its condition�
Use the Battery Replacement Data Book as a complete
source for nding the right battery quickly�
The Battery Council International Battery
Replacement Data Book makes it easy
to nd the correct BCI group (size) for
a specic application. The book is an
invaluable resource packed with useful
information, and it is easy to use:
– Dene the manufacturer, model,
and year of the vehicle or machine�
– Identify the BCI group and OE (Original
Equipment) cold cranking amps�
– Turn to the book’s battery data
section� Then, cross-reference
the John Deere part number to
the BCI group identied.
Best-t estimate — Some equipment manufac turers
do not provide complete replacement battery
information� Estimates are provided for replacement
battery size to give some guidance to the Battery
Replacement Data Book user� However, use caution
— the size stated is only an estimate� You should always
try to obtain the specic battery replacement size
information from the equipment manufacturer�
More valuable information — The BCI Data Book also
includes explanations on battery terminal types,
terminal placement, use of booster cables, safety
precautions, a BCI/DIN/EN reference chart, cell
layouts, and more� Use the BCI Data Book to your
advantage — it’s a great reference tool! Also,
information on the Battery Council International
organization can be found at http://www�
batterycouncil�org�
California Proposition 65 — The posters shown below
have been posted in John Deere California dealerships
according to California’s Proposition 65 requirements�
Noncompliance with California Proposition 65 could
cause dealerships to be liable and lose protection from
such claims under the terms of a battery
manufacturer’s settlement�
12.60 (or higher) 1.265 (or higher) 100% 3 (or less)
12.40–12.60 1.22 75% 4–6
12.20–12.40 1.16 50% 12
12.00–12.20 1.1 25% 22
11.70–12.00 1.04 0% 24
OCV*
Avg. Cell-Specic
Gravity
Approx.
SOC**
Approx.
Charging
Hours
†
38 39
MERCHANDISING RACKS
SWDISPLAY18
– Displays up to 18 batteries
– Utilizes 6 sq. ft. of
oor space
– Black, powder-coated,
gloss nish
– Durable steel construction
– E-Z Snap design allows for
quick assembly and requires
no tools or hardware
– Header frame and bracket
– Marketing signage included
SWDISPLAY12
Displays up to 12 batteries
– Utilizes 4 sq. ft. of
oor space
– Black, powder-coated,
gloss nish
– Durable steel construction
– Header frame and bracket
– Marketing signage and price
cards included
SWDISPLAY48
– Displays up to 48 batteries
– Gravity fed to assist with First In/
First Out (FIFO) rotation
– Utilizes 8 sq. ft. of oor space
– Black, powder-coated, gloss nish
– Pre-assembled tubular steel construction
– Includes wheels for easy movement
– Header frame and bracket
– Marketing signage and price cards included
SW90RACK
– Displays up to 90 batteries
– Gravity fed to assist with First In/
First Out (FIFO) rotation
– Utilizes 13 sq. ft. of oor space
– Black, powder-coated, semi-gloss nish
– Pre-assembled tubular steel construction
– Designed so it can be moved with
forklift or pallet jack
– Header frame and bracket
– Marketing signage and price cards included
Batteries are not included and should be ordered separately.
Weight 410 lb�
Width 52 in�
Height 73 in�
Height (w/header) 84 in�
Depth 36 in�
Weight 23 lb�
Width 34 in�
Height 32 in�
Height (w/header) 53 in�
Depth 15 in�
Weight 140 lb�
Width 27 in�
Height 52 in�
Height (w/header) 59 in�
Depth 27 in�
Weight 155 lb�
Width 48 in�
Height 70 in�
Height (w/header) 81 in�
Depth 23 in�
SWDISPLAY36
– Displays up to 36 batteries
– Utilizes 6 sq. ft. of oor space
– Black, powder-coated,
semi-gloss nish
– Black, tempered hardboard shelves
– E-Z Snap design allows for
quick assembly and requires no
tools or hardware
– Header frame and bracket
– Marketing signage included
Weight 85 lb�
Width 34�5 in�
Height 48 in�
Height (w/header) 66 in�
Depth 23 in�
40 41
BATTERY CHARGERS
No matter how low the mercury dips, or if you accidentally drain a battery, you’ll be up
and running in no time� Nothing delivers peace of mind like a quality battery charger�
WHEELED BATTERY CHARGER
WITH ENGINE START
TY27731
Battery types:
6V/12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– 6A<>2A Charge Maintain
– 50A Boost
– 250A/125A Engine Start
· 6V: 125A
· 12V: 250A
Additional Features:
– Digital display, LED indicators and
push-button controls
– 12-foot reach, 6-gauge output cables
– Microprocessor-controlled –
automatically adjusts amperage rate
to charge and maintain
Weight - 33.05 lbs
AUTOMATIC BATTERY
CHARGER WITH
ENGINE START
TY27733
Battery types:
– 12V lead-acid only (Wet, Gel, MF, EFB,
AGM)
Charging:
– 6A<>2A Charge Maintain
– 50A Engine Start
– 10A Boost
Additional Features:
– LED indicators
– Monitors and maintains the battery
when fully charged
– Microprocessor-controlled –
automatically adjusts amperage rate
to charge and maintain
Weight - 10.47 lbs
BATTERY CHARGER
WITH ENGINE START
TY27732
Battery types:
– 6V/12V lead-acid only (Wet, Gel, MF,
EFB, AGM)
Charging:
– 6A<>2A Charge Maintain
– 40A Boost
– 200A/150A Engine Start
· 6V: 150A
· 12V: 200A
Additional Features:
– Scrolling display, LED indicators and
push-button controls
– 12-foot reach, 6-gauge output cables
– Microprocessor-controlled –
automatically adjusts amperage rate
to charge and maintain
Weight - 27.59 lbs
TY27732 TY27733 TY27731
42 43
BATTERY MAINTAINERS BATTERY JUMP STARTERS
FULLY AUTOMATIC 1.5-AMP
ON-BOARD BATTERY
CHARGER/MAINTAINER
TY26328
Battery Types:
– 6V/12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– 1�5A Charge/Maintain
Additional Features:
– “Onboard” feature allows mounting
next to battery
– Float mode monitoring
– Fully automatic charging and
shutdown when charging is complete
Weight - 1 lb
FULLY AUTOMATIC
3-AMP BATTERY
CHARGER/MAINTAINER
TY27265
Battery Types:
– 6V/12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– 3A Charge/Maintain
Additional Features:
– Auto voltage detection -
6V or 12V battery
– Scrolling display with battery
charging percentage
– Reverse hook-up protection —
helps prevent damage to battery
and charger
Weight - 2.15 lbs
FULLY AUTOMATIC
1.5-AMP BATTERY
CHARGER/MAINTAINER
TY25866
*
Battery Types:
– 6V/12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– 1�5A Charge/Maintain
Additional Features:
– Auto voltage detection -
6V or 12V battery
– Float mode monitoring
– Reverse hook-up protection — helps
prevent damage to battery
and charger
Weight - 1.50 lbs
SWDSR108
Jump Starting:
– Peak Current: 450 Amps
– Battery types: 12V lead-acid only
(Wet, MF,EFB, AGM)
Charging:
– Gasoline Engine: Up to 6 liter
– Diesel Engine: Up to 3 liter
Additional Features:
– Charges off dead battery >7 volts
– Built in voltmeter
– Glow mode for cold start of
diesel engine
Weight - 3.65 lbs
CAUTION: The circumstances/conditions when starting a vehicle depend on various parameters: vehicle's condition, engine type
(petrol or diesel) and power, presence of battery in vehicle or not, temperature, and frequency of use.
* TY25866 restricted for sale in California. Suggest TY27265 as a substitute.
SWDSR116
Jump Starting:
– Peak Current: 2250 Amps
– Battery types: 12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
– 12V: 525 CA/350 CCA
Charging:
– 2A external automatic charger
– USB (Input): 2�1A
– 12V (DC Output): 12V (15A)
– 2 AC Outlets
Additional Features:
– 400W Inverter
– Digital display
– On/Off switch
– Reverse connection warning
Weight - 31 lbs
SWDSR115
Jump Starting:
– Peak Current: 4400 Amps
– Battery types: 12V/24V lead-acid only
(Wet, Gel, MF, EFB, AGM)
– 12V: 750 CA/525 CCA
– 24V: 475 CA/350 CCA
Charging:
– 2A external automatic charger
– USB (Input): 2�1A
– 12V (DC Output): 12V (15A)
Additional Features:
– Digital display
– On/Off switch
– Reverse connection warning
Weight - 13.25 lbs
44 45
BATTERY JUMP STARTERS (CONT.)
SWDSR119
Jump Starting:
– Peak Current: 1800 Amps
– Battery types: 12V lead-acid only
(Wet, MF,EFB, AGM)
– 12V: 280 CA/225 CCA
Charging:
– 12V (DC Output): 12V (15A)
– Built-in charger: for automatic
charging of internal battery
Additional Features:
– LED indicators: for charging and
status of internal battery
– Corrosion-proof polypropylene case
Weight - 19.59 lbs
SWDSR128
Jump Starting:
– Peak Current: 2000 Amps
– Battery Types: 12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
– 12V: 650 CA
Charging:
– 2A external automatic charger
– USB (Input): 2�1A (2x)
– 12V (DC Output): 12V (15A)
– Charging LED indicator
Additional Features:
– Rust and corrosion-proof case
– Reverse hook-up protection
– Professional clamps with ergonomic grips
Weight - 9.68 lbs
A-GB40
Jump Starting:
– Gasoline Engine Size: 6�0L
– Diesel Engine Size: 3�0L
– Jumps Per Charge: 20X
– Peak Current: 1000 Amps
– Battery Types: 12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– Micro USB (Input): 5V, 2�1A
– Micro USB (Output): 5V, 2�1A
– Recharge Time: 6hr (1A)
Flashlight:
– Lumens (LED’s): 100L
– Number of Modes: 7X (100%, 50%,
10%, SOS, Blink, Strobe, Off)
Weight: 2.4 lbs
A-GB20
Jump Starting:
– Gasoline Engine Size: 4�0L
– Diesel Engine Size: Not
Recommended
– Jumps Per Charge: 20X
– Peak Current: 500 Amps
– Battery Types: 12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– Micro USB (Input): 5V, 2�1A
– Micro USB (Output): 5V, 2�1A
– Recharge Time: 6hr (1A)
Flashlight:
– Lumens (LED’s): 100L
– Number of Modes: 7X (100%, 50%,
10%, SOS, Blink, Strobe, Off)
Weight - 2.1 lbs
A-GB50
Jump Starting:
– Gasoline Engine Size: 7�0L
– Diesel Engine Size: 4�5L
– Jumps Per Charge: 30X
– Peak Current: 1,500 Amps
– Battery Types: 12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– Micro USB (Input): 5V, 2�1A
– Micro USB (Output): 5V, 2�1A
– Recharge Time: 9hr (1A)
Flashlight:
– Lumens (LED’s): 200L
– Number of Modes: 7X (100%, 50%,
10%, SOS, Blink, Strobe, Off)
Weight: 3.0 lbs
46 47
BATTERY JUMP STARTERS (CONT.)
A-GB70
Jump Starting:
– Gasoline Engine Size: 8�0L
– Diesel Engine Size: 6�0L
– Jumps Per Charge: 40X
– Peak Current: 2,000 Amps
– Battery Types: 12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– Micro USB (Input): 5V, 2�1A
– Micro USB (Output): 5V, 2�1A
– 12V (Input): 12V (3A)
– 12V (Output): 12V (15A)
– Recharge Time: 14hr (1A) / 2-3 hrs
(12V Fast)
Flashlight:
– Lumens (LED’s): 400L
– Number of Modes: 7X (100%, 50%,
10%, SOS, Blink, Strobe, Off)
Weight: 5.0 lbs
A-GB150
Jump Starting:
– Gasoline Engine Size: 10�0L
– Diesel Engine Size: 10�0L
– Jumps Per Charge: 80X
– Peak Current: 4,000 Amps
– Battery Types: 12V lead-acid only
(Wet, Gel, MF, EFB, AGM)
Charging:
– Micro USB (Input): 5V, 2�1A
– Micro USB (Output): 5V, 2�1A
– 12V (Input): 12V (5A)
– 12V (Output): 12V (15A)
– Recharge Time: 22hr (1A) / 2-3 hrs (12V
Fast)
Flashlight:
– Lumens (LED’s): 500L
– Number of Modes: 7X (100%, 50%,
10%, SOS, Blink, Strobe, Off)
Weight: 7.5 lbs
A-GB500
Jump Starting:
– Gasoline Engine Size: Class 8+/CE J
– Diesel Engine Size: Class 8+/CE
– Jumps Per Charge: 400X
– Peak Current (12V): 20000 Amps
Peak Current (24V): 10000 Amps
– Battery Types: 12 & 24V lead-acid
(Wet, Gel, MF, EFB, AGM)
Charging:
– Micro USB (Input): 5V, 2�1A
– Micro USB (Output): 5V, 2�1A (2X)
– 12V (Input): 12V (4A)
– 12V (Output): 12V (15A)
– Recharge Time: 22hr (1A) / 2-3 hrs
(12V Fast)
Flashlight:
– Lumens (LED’s): 2,200L
– Number of Modes: 7X (100%, 50%,
10%, SOS, Blink, Strobe, Off)
Weight: 19.25 lbs
POWERUP!™ CONSUMER ELECTRONICS
DUAL 2.4 USB
CHARGER/ADAPTER
PM191-052901
– Ideal for mobile devices
– Input: 12-24V DC
– Output: 5�4V @ 4�8A (2�4A + 2�4A)
– LED power indicator
– Energy efcient
– 1-year limited warranty
USB CABLES
– Charge and sync at the same time through a standard USB port
– Strain relief cable provides lasting durability
– 6-ft� cables
– 1-year limited warranty
WALL CHARGER
WITH 2.4 USB
PM191-052079
– Charge USB devices while keeping
full use of outlets
– AC: 120V 15A/60hz 1800W
– USB Output: 5V @2�4A
– Energy-efcient
– 1-year limited warranty
3-IN-1 CHARGER (2.4A)
PM191-05448
– Car, Wall or USB port
– AC: 100-240V
– DC: 12-24V
– Output: 5V @2�4A
when only one USB is charging
– Energy-efcient
– 1-year limited warranty
PM191-050563
(Micro-USB)
PM191-050860
(Type-C)
PM191-050594
(Apple)
POWERUP!™ POP COUNTER DISPLAY KIT
– PM191-050563 – 4 pieces
– PM191-050860 – 4 pieces
– PM191-050594 – 4 pieces
– PM191-054448 – 3 pieces
– PM191-052901 – 5 pieces
– PM191-052079 – 3 pieces
48 49
BATTERY CLEANING PRODUCTS AND ACCESSORIES
YOUR ONE-STOP SHOP
FOR BATTERY ACCESSORIES.
The wide selection of John Deere battery accessories includes terminals,
terminal brushes, bolts, corrosion preventative, and terminal cleaner —
everything you need� We also offer battery and booster cables in a variety
of popular sizes� And if we don’t have the size of cables you need, we’ll
custom-make them while you wait� See us for competitively priced, SAE-
approved battery accessories for all applications, be it agricultural, lawn
and garden, automotive, truck, and more� John Deere is your one-stop
battery and accessories shop�
Description Part Number
Top post terminal 1/CS TY25910
Top post terminal coated 2/CS TY25929
Fleet terminal 1/CS TY25914
Marine terminal, epoxy coated 2/CD TY25892
OEM terminal with wing nut TY25928
Terminal protector, top 2/CD TY25913
L&G bolts 2/CD TY25899
Marine terminal 1/CS TY25912
Top post battery terminal 10/CD TY25915
Side terminal 1/CS TY25911
Nut and bolt bulk packaged 2/CD TY25908
HD-Commercial top post terminal 10/CD TY25916
Gr 31 charging posts 2/CD TY25918
Gr 31 closed stainless steel
nut 2/CD
TY25917
10-in. J bolt 2/CD TY25902
12-in. J bolt 2/CD TY25903
Sure-grip battery carrier TY25900
500P clamps 2/CD TY25935
Hydrometer TY25901
Cleaning and cutting tool TY25921
Steel terminal brush TY25905
50-amp clamp 2/CD TY25897
Battery Corrosion Preventative TY25766
Battery Corrosion Cleaner TY25767
TY26217
Professional Service 20-foot
– 100%-copper 2-gauge cables
– Thermoplastic rubber cable insulation protects
against oil, grease, and abrasion
– Color-coded, tangle-free, dual-cable
construction designed for maximum exibility
and ease in handling
– 600-amp parrot-style clamps
– Manufactured in U�S�A�
TY27301
Professional Service 20-foot
– Copper-clad 2-gauge cables
– Tough PVC insulation remains exible
at extreme temperatures
– Color-coded cable and clamp for easy
polarity identication
– 600-amp parrot-style clamps
– Manufactured in U�S�A�
TY26215 — Commercial Service 16-foot
TY26216 — Commercial Service 20-foot
– 100%-copper 4-gauge cables
– Tough vinyl insulation, color-coded,
tangle-free, dual-cable construction
– 600-amp parrot-style clamps
– Manufactured in U�S�A�
– TY27302 — Commercial Service 20-foot
– Copper-clad 4-gauge cables
– Tough PVC insulation remains exible
at extreme temperatures
– 600-amp parrot-style clamps
– Manufactured in U�S�A�
Always be prepared
for the unexpected.
Keep a set of John Deere booster cables in your car, pickup,
garage, or shop� Available in 16- or 20-foot lengths, these
heavy-duty 500-amp cables come in 2- and 4-gauge wire� They
feature parrot-jaw clamps for secure connections�
BOOSTER CABLES
AND CLAMPS
50 51
BUILT AND TESTED FOR
REAL CONDITIONS. YOURS.
This literature has been compiled for worldwide circulation� While general information, pictures and
descriptions are provided, some illustrations and text may include nance, credit, insurance, product
options and accessories NOT AVAILABLE in all regions� PLEASE CONTACT YOUR LOCAL DEALER FOR
DETAILS. John Deere reserves the right to change specication and design of all products described in
this literature without notice�
www�JohnDeere�com
www�JohnDeere�ca
Print Information (21-02)
