Oracle
®
Enterprise Performance Management System
Readme
Release 11.2.2.0.000
F32147-01
June 2020
Oracle Enterprise Performance Management
System Release 11.2.2.0.000 Readme
Related Topics
• Purpose
• Scope of this Release
• New Features in This Release
• Installation Information
• Supported Platforms
• Supported Languages
• Supported Paths to this Release
• Compatibility
• Defects Fixed in Release 11.2.x
• Known Issues in Release 11.2.2
• Tips and Troubleshooting
• Documentation Updates
Purpose
This document includes important, late-breaking information about this release of
Oracle Enterprise Performance Management System. Review this Readme thoroughly
before installing EPM System.
Scope of this Release
Oracle Enterprise Performance Management System Release 11.2.x offers these
benefits:
• Delivers updated technology, including Fusion Middleware (FMW) 12g.
• Includes updated platform certifications.
1
• Streamlines and simplifies the architecture, updating the underlying technology
stack.
• Provides a simplified repository configuration to streamline infrastructure and
architecture for the future.
• Premier Support is provided through at least 2030.
Release 11.2.x doesn't support the following features and products:
• Vertical scaling. Vertical scaling is not supported in Release 11.2.
• Oracle Hyperion EPM Architect isn't available in EPM System Release 11.2. If
you're migrating to EPM System Release 11.2 and have Oracle Essbase, Oracle
Hyperion Planning, Oracle Hyperion Profitability and Cost Management, or Oracle
Hyperion Financial Management metadata in Performance Management Architect
Release 11.1.2.4, you can migrate the metadata out of Performance Management
Architect Release 11.1.2.4 into Oracle Data Relationship Management Release
11.2. See Oracle Data Relationship Management Integrating Oracle Data
Relationship Management Suite with Enterprise Performance Management.
• Simplified Interface
• Smart Push isn't supported in this release. If you used Smart Push in Release
11.1.2.4, when you upgrade to 11.2, you can no longer use Smart Push.
• Oracle Hyperion Strategic Finance
• Oracle Crystal Ball (replaced by Predictive Planning)
• Oracle Enterprise Performance Management Mobile
• Offline Planning
• Oracle Hyperion Workforce Planning
• Oracle Hyperion Capital Asset Planning
• Oracle Project Financial Planning
• Oracle Hyperion Public Sector Planning and Budgeting
• Financial Management Analytics
• Quantitative Management and Reporting for Solvency
• Oracle Essbase Studio Console. Note that the Oracle
®
Essbase Studio Release
11.1.2.4 User's Guide does not apply to Release 11.2.x.
• Disclosure Management
• Oracle Hyperion Performance Scorecard
• Hyperion BI Plus. You can’t migrate Release 11.1.2.4 reports that used Essbase
as a data source to Release 11.2. In Release 11.2, Oracle Hyperion Financial
Reporting, which is now a component of Hyperion Financial Applications,
continues to support connections to a Planning data source using an Essbase
connection, as well as Profitability and Cost Management.
• Oracle Hyperion Financial Close Management Release 11.2 doesn't support the
following features.
2
– The ability to configure a content management system for Financial Close
Management
– Financial Management integrations
– Event monitoring, automated integrations, and end-user integrations requiring
integrated parameters
• Oracle Essbase Analytics Link. If you used Oracle Essbase Analytics Link
11.1.2.2.500 with Oracle Hyperion Financial Management 11.1.2.4, you can
continue to use it with Oracle Hyperion Financial Management 11.2.x and Oracle
Hyperion Tax Provision 11.2.x. Log on to My Oracle Support, search for and read
Knowledge Document 2562089.1.
Note:
EPM System Release 11.2 uses Essbase Release 11.1.2.4. When deployed
with EPM System Release 11.2, Essbase Release 11.1.2.4 follows EPM
System Release 11.2 certifications.
New Features in This Release
Related Topics
• About the New Features in this Release
• New Features in Release 11.2.2
About the New Features in this Release
This section includes new features in Release 11.2.2. To review the list of new features
from earlier releases, use the Cumulative Feature Overview tool. This tool enables
you to identify the products you own and your current implementation release. With a
single click, the tool quickly produces a customized report of new feature descriptions.
This tool is available here:
https://apexapps.oracle.com/pls/apex/f?p=20620:1:0
New Features in Release 11.2.2
EPM System New Features
Oracle Enterprise Performance Management System Release 11.2.2 adds support for
Oracle Enterprise Linux Release 7 and RedHat Linux Release 7, 64-bit only. Check
the Oracle Enterprise Performance Management System Certification Matrix for all
platform requirements and details.
3
Note:
If you apply the update to move from an existing Release 11.2.0 or Release
11.2.1 installation to Release 11.2.2, you can’t roll back to the previous
release.
Internet Explorer Browser Support
For Internet Explorer browser users, Microsoft recommends using the new Microsoft
Edge as your default browser. With this guidance in mind, EPM System no longer
supports Internet Explorer starting with Release 11.2.2.0.000. For additional guidance
on Internet Explorer Lifecycle, contact Microsoft.
Installation Information
Late-breaking information about the installation of EPM System products is provided
in this readme. Review this information thoroughly before installing EPM System
products.
Complete instructions for installing this release are in the Oracle Enterprise
Performance Management System Installation and Configuration Guide.
Note:
After installing Release 11.2.x, you must run the Repository Creation Utility
and edit
RCUSchema.properties
on each machine in your environment
before configuring with EPM System Configurator. For details, see Creating
Infrastructure Schemas Using Repository Creation Utility and Updating RCU
Schema Properties.
Supported Platforms
Related Topics
• About Supported Platforms
• Browser Support
About Supported Platforms
Information about system requirements and supported platforms for Oracle Enterprise
Performance Management System products is available in spreadsheet format in the
Oracle Enterprise Performance Management System Certification Matrix. This matrix
is posted on the Supported Platforms Matrices page on Oracle Technology Network
(OTN):
4
https://www.oracle.com/middleware/technologies/bi-foundation/hyperion-supported-
platforms.html
Browser Support
EPM System does not have a browser version dependency; however, it is possible
that the products that EPM System works with do have dependencies.
Check the Oracle Enterprise Performance Management System Certification Matrix
and specific product readmes for any additional browser support requirements.
The matrix is posted on the Supported Platforms Matrices page on OTN:
https://www.oracle.com/middleware/technologies/bi-foundation/hyperion-supported-
platforms.html
Supported Languages
Information about supported languages for Oracle Enterprise Performance
Management System products is available in spreadsheet format on the Translation
Support tab in the Oracle Enterprise Performance Management System Certification
Matrix. This is posted on the Supported System Configurations page on OTN:
https://www.oracle.com/middleware/technologies/bi-foundation/hyperion-supported-
platforms.html
Supported Paths to this Release
• Release 11.1.2.4. You can upgrade Oracle Enterprise Performance Management
System Release 11.1.2.4 products to Release 11.2.x. To update your existing
applications, you deploy EPM System Release 11.2.x software on a new
machine and then migrate EPM System Release 11.1.2.4.xxx artifacts (such
as applications, metadata, and security) and data to the new deployment. See
Upgrading EPM System in the Oracle
®
Enterprise Performance Management
System Installation and Configuration Guide.
• Release 11.2.1. To move from EPM System Release 11.2.1 to 11.2.2, use the
Apply Update option in EPM System Installer. See Applying an Update to EPM
System Products in the Oracle
®
Enterprise Performance Management System
Installation and Configuration Guide.
• Release 11.2.0. To move from EPM System Release 11.2.0 to 11.2.2, use the
Apply Update option in EPM System Installer. See Applying an Update to EPM
System Products in the Oracle
®
Enterprise Performance Management System
Installation and Configuration Guide.
Compatibility
EPM System supports the Oracle Enterprise Performance Management System
product versions listed in the Release Compatibility tab in the Oracle Enterprise
Performance Management System Certification Matrix. This matrix is posted on the
Supported Platforms Matrices page on OTN:
5
https://www.oracle.com/middleware/technologies/bi-foundation/hyperion-supported-
platforms.html
Defects Fixed in Release 11.2.x
Related Topics
• Installation and Deployment Defects Fixed
• Calculation Manager Defects Fixed
• EPM Workspace Defects Fixed
• FDMEE Defects Fixed
• Financial Close Management Defects Fixed
• Financial Management Defects Fixed
• Financial Reporting Defects Fixed
• Planning Defects Fixed
• Profitability and Cost Management Defects Fixed
• Shared Services Defects Fixed
• Tax Governance Defects Fixed
• Tax Provision Defects Fixed
Installation and Deployment Defects Fixed
Installation and Deployment Defects Fixed in Release 11.2.2
Release 11.2.2 resolves the following installation and deployment defect:
31036144, 31011584 - References to unused version of Struts 1.2.9 no longer remain
in the deployment environment or in the user interface after installation.
Installation and Deployment Defects Fixed in Release 11.2.1
Release 11.2.1 resolves the following installation and deployment defect:
30619061 - FDMEE deployment fails. When installing products with EPM System
Installer, install all products at one time for each machine in the environment. You can't
install one or more products first and then install another product later.
Installation and Deployment Defects Fixed in Release 11.2.0
Release 11.2.0 includes all defects fixed from any PSE or PSU released after Release
11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
6
Calculation Manager Defects Fixed
Calculation Manager Defects Fixed in Release 11.2.2
There are no Oracle Hyperion Calculation Manager defects fixed in Release 11.2.2.
Calculation Manager Defects Fixed in Release 11.2.1
Release 11.2.1 resolves the following Calculation Manager defect:
30822639 -- Single managed Web Logic server deployment for Oracle Hyperion
Planning along with Oracle Hyperion Calculation Manager now works correctly.
Calculation Manager Defects Fixed in Release 11.2.0
Release 11.2.0 includes all defects fixed from any PSE or PSU released after Release
11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
EPM Workspace Defects Fixed
EPM Workspace Defects Fixed in Release 11.2.2
Release 11.2.2 resolves the following Oracle Hyperion Enterprise Performance
Management Workspace defect:
31317474 -- Previous EPM Workspace releases used Ctrl-Shift-T to move the focus
to the toolbar and Ctrl-Shift-N to create a new document. Browsers have since started
using these key sequences to open a new browser tab and a new incognito window,
so this release changes them. The new sequence used to move the focus to the
toolbar is Ctrl-Shift-A. The new sequence to create a new document is Ctrl-Shift-E.
EPM Workspace Defects Fixed in Release 11.2.1
Release 11.2.1 resolves the following EPM Workspace defects:
• 30833013 -- You no longer receive warning messages when setting preferences.
• 30800435 -- The Predictive Planning download is now removed from the Tools
menu.
• 30657663 -- You no longer receive warning messages while setting preferences
for admin users.
• 29754398 -- The Change Owner button is now disabled for users with the viewer
role.
• 29750187 -- You can no longer assign different access control permissions to the
same user.
EPM Workspace Defects Fixed in Release 11.2.0
7
Release 11.2.0 includes all defects fixed from any PSE or PSU released after Release
11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
FDMEE Defects Fixed
FDMEE Defects Fixed in Release 11.2.2
There are no Oracle Hyperion Financial Data Quality Management, Enterprise Edition
defects fixed in Release 11.2.2.
FDMEE Defects Fixed in Release 11.2.1
There are no FDMEE defects fixed in Release 11.2.1.
FDMEE Defects Fixed in Release 11.2.0
Release 11.2.0 resolves the following FDMEE defects:
• 30402633 -- When loading data to Oracle Hyperion Financial Management, you
no longer receive the error message: "EPMHFM-66076: SERVER <HFM SERVER
NAME> IS UNAVAILABLE."
• 30398283 -- The Intersection Check Report now generates results correctly.
• 30154251 -- Data load mappings no longer fail when mappings exceed 4000
characters.
• 30141663 -- The journal export to a Financial Management application no longer
fails when loading to parent adjustments ([parent adjs]).
• 30141552 -- Multiple entities in a single journal for parent currency adjustments
(<parent curr adjs>) now load correctly.
• 30135219 -- HFM_LOAD.py scripts now generate journal files correctly.
• 30135180 -- Export to Financial Management no longer fails when data protection
is enabled and when cell text is included.
• 30135167 -- Data exports from FDMEE to Financial Management now preserve
decimal and thousands places.
• 28849213 -- Import data from Financial Management using a prefixed application
now works correctly.
Release 11.2.0 also includes all defects fixed from any PSE or PSU released after
Release 11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
Financial Close Management Defects Fixed
Financial Close Management Defects Fixed in Release 11.2.2
There are no Oracle Hyperion Financial Close Management defects fixed in Release
11.2.2.
8
Financial Close Management Defects Fixed in Release 11.2.1
There are no Financial Close Management defects fixed in Release 11.2.1.
Financial Close Management Defects Fixed in Release 11.2.0
There are no Financial Close Management defects fixed in Release 11.2.0.
Financial Management Defects Fixed
Financial Management Defects Fixed in Release 11.2.2
Release 11.2.2 resolves the following Oracle Hyperion Financial Management defects:
• 31394519 - Data is retained after you upload metadadata and refresh the
database.
• 31371499 - You can now use over 50 characters in the database name field.
Financial Management Defects Fixed in Release 11.2.1
Release 11.2.1 resolves the following Financial Management defects:
• 30878222 - Task audit for posted and unposted journals now includes the POV
description.
• 22874380 - The Import Application admin task is now translated to Japanese.
• 22922666 - The Stop icon for the rules profile is now translated to Japnese.
• 30597634 - When you click the Reset button on the Load Data page, errors no
longer occur.
• 30473653 - In the Intercompany Manager module, filtering and member selection
now work correctly for non-admin users.
• 30599404 - For Intercompany transactions, when the system is idle for 30
minutes, the system correctly displays a timeout message.
• 30563714 - The ADF logs no longer display warning messages about the session
interface.
• 30655855 - When loading documents, the Document Type is now displayed.
• 30656081 - In data grids, the system correctly shows No data to display without
the row heading when Suppress No Data is selected.
• 30154410 - Cell information is now displayed without errors.
• 30215359 - The Task audit logs no longer display blank entries.
• 30633972 - Opening Consolidation Administration, System Messages no longer
produces errors.
• 30729143 - The UseCalcStatusCacheDuringConsol configuration setting has been
added.
9
• 30579442 - When you refresh a Smart View Adhoc worksheet, an invalid item
error no longer occurs.
• 30668389 - Logging has been added for the mailer send function.
• 30837904 - Intercompany Reports run as expected after upgrading to 11.1.2.4.
• 30879668 - After upgrading to 11.2 for an application that used EPMA, the security
and metadata load options work correctly.
• 30884901 - Task audit for posted and unposted journals now includes the POV
description.
• 21900002 - You can assign a user with all security classes when there are more
than 100 security classes.
• 30532348 - When you load application elements and select member lists during
the load process, errors no longer occur.
• 30633571 - After creating an application, the XfmDataSource server process is
now visible.
• 30065194 - Accessing an application after services restart no longer produces an
error.
• 21913006 - After data loads, temp files are now cleared in the HFM Server
working folder.
• 30567789 - The Copy/Paste right-click menu within the Submission Phases table
now works properly.
• 30644654 - When creating a folder while selecting the Security Class folder, an
unexpected error no longer occurs.
• 30574562 - When you re-select the cell menu in Process Control, an unexpected
error no longer occurs.
• 30594283 - When you click Refresh in Manage Journals, an unexpected error no
longer occurs.
• 30599527 - When you click Refresh in Running Tasks, an unexpected error no
longer occurs.
• 30612953 - In Process Control, you can now change the cell after navigating from
Manage Journals.
• 30644776 - You can move an account from the Journal table to the POV.
• 30675159 - In Task Flows, when you run the Calculate task flow, the entry displays
correctly in the audit log.
• 30777520 - Extract Security now correctly extracts the security class access.
• 30891066 - Large data grids now open successfully without errors.
Financial Management Defects Fixed in Release 11.2.0
Release 11.2.0 includes all defects fixed from any PSE or PSU released after Release
11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
• 22263269 - Support for SSL connections to MS SQL Server has been added.
10
• 23078316 - Smart View indentation now works correctly.
• 23228048 - Importing an application now completes without errors.
• 23265348 - When extracting data using a taskflow, Line Item details are now
correctly extracted.
• 24580736 - In Shared Services, removing more than one security class is now
possible.
• 24670673 - Journal reports show the same created/ posted dates as Manage
Journals.
• 24753701 - Using Financial Management with SQL Server no longer causes
ODBC errors.
• 25250479 - Data forms that use a dynamic member list complete without invalid
member errors.
• 25310773 - The Financial Management Insights feature now opens successfully.
• 25474272 - In Import Applications, Unicode application names and descriptions
are now supported.
• 25525587 - The Document tabs display correctly when the browser zoom level is
more than 100%.
• 25556937 - When you run an overlapping consolidation process, a warning
message is displayed.
• 25660919 - Users with the View Data Audit role can now extract data audit
records.
• 25723476 - You can delete a single journal entry row in a journal.
• 25869969 - The Load Data tab now opens successfully after you clear data load
rows.
• 26813051 - In Taskflows, the Process Management action now has an option to
select a phase.
• 26839964 - If a user does not have security access to the POV, cell text is not
available for the user.
• 27057323 - In Smart View Ad-Hoc, the error about using each dimension once no
longer occurs.
• 27222752 - Journals can be created successfully for the Windows regional
language.
• 27566241 - In Extended Analytics, a Data Extract template that was migrated
previously now opens successfully.
• 27590946 - The Import Application process now completes successfully when you
use data filters.
• 27654716 - You can now choose the delimiter when using a Taskflow to perform a
data extract.
• 27839227 - The cell information no longer displays data when a data grid shows
Invalid Intersection.
11
• 27866478 - A data form cell with an Override string now displays correctly in
Smart View.
• 27972605 - Custom short names and aliases now display properly after upgrade.
• 28031470 - HFM Insights now correctly displays the status of the application.
• 28058040 - When loading metadata, the system checks referential integrity
properly.
• 28150657 - After upgrading, the Currency grid cells display the correct colors for
invalid cells.
• 28201606 - Using a Turkish character set, non-admin users can log in to
applications.
• 28201675 - When an Admin-task is running for an application, the system
prevents a second admin-task from starting.
• 28201679 - The Reorder Tabs option no longer displays when only one tab is
open.
• 28201685 - In data forms, you can attach cell text documents for Contribution
Total.
• 28201692 - In Database Management, errors no longer occur when copying data
for member lists.
• 28201720 - Localization issues have been fixed in data forms.
• 28201726 - Localized text now displays correctly in error messages.
• 28201820 - Opening applications no longer produces a session error.
• 28202030 - The shortcut key for Importing Applications has been changed.
• 28202075 - Modifying and reopening large data grids no longer causes memory
issues.
• 28202085 – Error messages for large data grids are now more specific.
• 28208272 - Localized text now displays correctly in the rules profiler.
• 28208284 - Localized text now displays correctly in the Web form designer.
• 28208296 - Localized text now displays correctly in defining dimensions.
• 28208455 - In Process Control, the calculation status summary chart is now
displayed.
• 28208469 - Applications are now always started on the expected servers.
• 28208495 - In Data Forms, Manage Process document attachments now work
properly.
• 28208498 - Manage Process now opens correctly from a data grid.
• 28208536 - The Extract Metadata process now shows the correct value for Enable
Customs settings.
• 28208616 - User-defined attributes now load correctly for custom dimensions in a
metadata load.
• 28373451 - After upgrading, Journal reports open properly in edit mode.
12
• 28373472 - Importing applications now successfully copies data tables.
• 28373491 - When you run Clear Data, you can now select to skip Inactive
Descendants.
• 28430521 - Entity Details are now displayed correctly in data forms.
• 28438177 - After upgrading, you can now set up Related Content links.
• 28537099 - When setting the Reason Code for Intercompany Transactions, the
system checks the user’s access rights.
• 28572025 - No Input rules now work as expected with user-defined properties in
metadata.
• 28578746 - Descriptions of Account members with single quotes are now exported
properly.
• 28578771 - The Scheduled Start time now displays correctly in Running Tasks.
• 28639446 - Clear Data functionality now works correctly for non-admin users.
• 28658627 - In Smart View, scaling and decimal values display correctly when
entering the values in Ad-Hoc.
• 28665974 - After consolidation, the system displays the correct calculation status
for parent and child members.
• 28679068 - Running Scan / Delete Invalid Records for larger applications
completes successfully.
• 28706652 - The security class of a data grid is now retained when it is opened
from a tasklist.
• 28721135 - Consolidations are no longer failing intermittently with VBScript rule
errors.
• 28844044 - The application ODL log no longer logs many Invalid Item ID errors
daily.
• 28872562 - Deleting Data Audit records using filter settings now works correctly.
• 28872569 - After a data load, the Drill Through option is now displayed correctly.
• 28872581 - For Process Management Actions in a Taskflow, you can select
multiple entities.
• 28872591 - Connecting to Financial Management now works successfully from
Smart View.
• 28872600 - In Process Control, you can view Ancestors for base level and parent
level entities.
• 28872619 - The OnDemand rules now only execute if the user has the proper
security access.
• 28872633 - When you load Intercompany reports in the Load Document page, you
can now select Intercompany in the Document Type list.
• 28872640 - The number of database connections is now higher for multi-server
environments.
• 28872669 - Task Audit now displays more than 100 task audit items.
13
• 28872672 - Security checks for Intercompany Matching reports through Process
Management now work correctly.
• 28872679 - Task audit records are properly displayed when the date range is set
to the Include All option.
• 28954706 - Smart View displays the same data for a dynamic account with scale
as the data form.
• 28961407 - The “Object reference not set” error no longer occurs for journal
entries in Smart View.
• 29028946 - After upgrading, submitting cell line item data now completes
successfully.
• 29166449 - The METADATAVIEWOPTION.SETINCLUDEGENERATION function
now works correctly in the Object API.
• 29180315 - The Override member with Current function now updates and
overrides data correctly in data forms after changing the POV.
• 29184593 - In data grids, the source transaction now displays the correct values
for the POV.
• 29228227 - Security classes are now sorted in alphabetiical order by label.
• 29231440 - Data export from FDMEE is allowed for non-default ports.
• 29233885 - An extracted data file can be loaded again if cell text is entered for
multiple lines.
• 29247315 - When refreshing a Smart View worksheet, the “data grid object” error
no longer occurs.
• 29259048 - The AllowOverlappingConsolidationOverride setting now works
correctly.
• 29295178 - The Entity member is now displayed in Parent.Child format for all data
form dialogs.
• 29295187 - You can select a non-ICP Parent member for the ICP dimension in
data forms.
• 29328045 - Extended Analytics extract process now extracts all the records
successfully.
• 29390276 - Custom documents such as a PDF now open properly in Internet
Explorer.
• 29479736 - You can now open a data grid or form in Smart View from the Oracle
Smart View Web link.
• 29532285 - Connecting to Smart View no longer produces errors.
• 29642147 - Running an Auto-match in Intercompany Transactions now completes
successfully.
• 29677326 - In Process Control, seleting Process History with filters no longer
results in errors.
• 29687618 - Using a taskflow for performing a delete operation for extract data to
database no longer produces errors.
14
• 29694554 - The tempdb size no longer continually increases after queries.
• 29836165 -Support has been added for self-signed certificates and for SSL
connections to Oracle.
• 29856197 - Updating security classes in a bulk upload now works correctly.
• 29921059 - Configuration settings have been added for
MaxNumConcurrentCalculations and ConcurrentCalculationWaitTime.
• 29926439 - When you access Running Tasks from Consolidation Administration, it
no longer displays a server error.
• 29932718, 30080890 - The Data Load process no longer takes a long time to load
over 1 million records.
• 29942897 - The Force Calculation activity is now included in audit logs.
• 30363713 - When you extract security reports from Shared Services, Running
Tasks no longer displays blank tasks.
• 30137941 - The start time for tasks with a Scheduled Start time now displays
correctly.
• 30109400 - When you access HFM Insights, an ADF error no longer occurs.
• 30079047 - The Intercompany Matching Report run time now matches the time in
the Task Audit report.
Financial Reporting Defects Fixed
Financial Reporting Defects Fixed in Release 11.2.2
There are no Oracle Hyperion Financial Reporting defects fixed in Release 11.2.2.
Financial Reporting Defects Fixed in Release 11.2.1
Release 11.2.1 resolves the following Financial Reporting defects:
• 30567762 -- The first time you change the chart properties for a chart in Oracle
Hyperion Financial Reporting Web Studio, it causes a "Subscript out of range"
error.
• 30567441 -- The Chart Format Utility in Web Designer does not save the modified
step adjustment.
• 30473585 -- The Chart Format Utility in Web Designer does not save various
settings.
Financial Reporting Defects Fixed in Release 11.2.0
Release 11.2.0 includes all defects fixed from any PSE or PSU released after Release
11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
15
Planning Defects Fixed
Planning Defects Fixed in Release 11.2.2
Release 11.2.2 resolves the following Oracle Hyperion Planning defect:
31057904—When importing Planning artifacts from 11.1.2.4 to 11.2, a timestamp
format error for cell text no longer occurs.
Planning Defects Fixed in Release 11.2.1
Release 11.2.1 resolves the following Planning defect:
30885453—Planning Service fails to start in compact deployment mode.
Planning Defects Fixed in Release 11.2.0
Release 11.2.0 includes all defects fixed from any PSE released after Release 11.1.2.4
or any PSU through Planning 11.1.2.4.009. See those readmes for the list of defects
fixed in each PSE or PSU.
Profitability and Cost Management Defects Fixed
Profitability and Cost Management Defects Fixed in Release
11.2.2
There are no Oracle Hyperion Profitability and Cost Management defects fixed in
Release 11.2.2.
Profitability and Cost Management Defects Fixed in Release
11.2.1
Release 11.2.1 resolves the following Profitability and Cost Management defects:
• 30830579 -- From the Profitability Applications console, creating a new Detailed
Profitability application using the Native method was blocked by an error in the
New Application dialog; that error is fixed in this release.
• 30793278 -- For Management Ledger applications, the Rule Sets and Rules tab
in Model Validation was initially only showing the first 6 errors; the remaining error
lines were displayed only after clicking the Query by Example icon. In this release,
all of the errors are shown directly after running the validation, as expected.
• 30776134 -- The Export Dimension feature in the Profitability Applications console
was creating a comma-separated-values (csv) dimension text file with correctly-
formatted contents, but without the expected ".csv" file suffix. In this release, the
Export Dimensions feature correctly creates the dimension text file with the .csv
file suffix.
16
• 30774672 -- For Standard Profitability applications, in the Manage Queries screen,
changes to the Suppress #Missing and the Dimension Aliases check boxes were
not correctly saved; that problem is fixed in this release.
• 30665293, 30670795 -- For Standard Profitability applications, the Job Status =>
Search Task screen was not accessible; it is restored in this release.
Profitability and Cost Management Defects Fixed in Release
11.2.0
Release 11.2.0 includes all defects fixed from any PSE or PSU released after Release
11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
Shared Services Defects Fixed
Shared Services Defects Fixed in Release 11.2.2
There are no Oracle Hyperion Shared Services defects fixed in Release 11.2.2.
Shared Services Defects Fixed in Release 11.2.1
Release 11.2.1 resolves the following Shared Services defects:
• 30652318 - Firefox no longer displays the
There is no Action mapped for
namespace {/framework/audit}
error message when you click View Audit
Report after selecting artifacts in the Artifact List tab of Oracle Hyperion Shared
Services Console.
• 30202186 - You no longer receive the
Fatal Error: Error initializing
network
message after configuring SSL between Oracle Essbase and Oracle
Enterprise Performance Management System using the procedures available in
the Oracle Enterprise Performance Management System Security Configuration
Guide.
Shared Services Defects Fixed in Release 11.2.0
Release 11.2.0 includes all defects fixed from any PSE or PSU released after Release
11.1.2.4. See those readmes for the list of defects fixed in each PSE or PSU.
Tax Governance Defects Fixed
Tax Governance Defects Fixed in Release 11.2.2
Release 11.2.2 resolves the following Oracle Hyperion Tax Governance defect:
30560073 - The Smart View Tax Extension does not install properly on a Windows 10,
Office 32 bit machine.
17
Tax Governance Defects Fixed in Release 11.2.1
There are no Tax Governance defects fixed in Release 11.2.1.
Tax Governance Defects Fixed in Release 11.2.0
There are no Tax Governance defects fixed in Release 11.2.0
Tax Provision Defects Fixed
Tax Provision Defects Fixed in Release 11.2.2
There are no Oracle Hyperion Tax Provision defects fixed in Release 11.2.2.
Tax Provision Defects Fixed in Release 11.2.1
There are no Tax Provision defects fixed in Release 11.2.1.
Tax Provision Defects Fixed in Release 11.2.0
There are no Tax Provision defects fixed in Release 11.2.0.
Known Issues in Release 11.2.2
Related Topics
• About Known Issues
• Installation and Deployment Known Issues
• Calculation Manager Known Issues
• EPM Workspace Known Issues
• FDMEE Known Issues
• Financial Close Management Known Issues
• Financial Management Known Issues
• Financial Reporting Known Issues
• Planning Known Issues
• Profitability and Cost Management Known Issues
• Shared Services Known Issues
• Tax Governance Known Issues
• Tax Provision Known Issues
About Known Issues
18
The topics in this section contain the noteworthy known issues of this release.
Installation and Deployment Known Issues
Installation and deployment in Release 11.2.2 includes the following known issues:
• 31371499 - After installing Oracle Enterprise Performance Management System
Release 11.2.2 using the Apply Update option, you must update the Oracle
Hyperion Financial Management schema:
To update the Financial Management schema:
1. In Windows Explorer, navigate to EPM_ORACLE_HOME/products/
FinancialManagement/Server/conf.
2. Launch the following script:
DBtype_from_11.2.1.0.000_to_11.2.2.0.000_SchemaUpgrade.sql
• 31524199 - Oracle Hyperion Enterprise Performance Management System
Diagnostics doesn’t report on all products in a distributed environment that were
installed using the Apply Update option.
• 31395782 - On Linux computers, silent mode EPM System Configuration works
if executed manually. Silent mode configuration using scripting tools may not run
reliably.
• 31422089 - You can't configure Microsoft SQL Server with the Windows
authentication option.
• 31181551 - On Linux, you can't deploy to a single managed server in silent
mode when the
<auto_port_tick>
parameter is set to
false
. To work around
this issue, set the
<auto_port_tick>
parameter to false:
<auto_port_tick>true</
auto_port_tick>
.
• 31057630 - The Apply Update installation option in EPM System Installer doesn't
work using silent installation.
• 30779559 - Installation of Oracle HTTP Server (OHS) fails without giving an
error. Then, when configuring with EPM System Configurator, the Web Server
configuration task for Oracle HTTP Server (OHS) fails.
Workaround:
After downloading files from EDelivery, extract EPM files to a folder that is nested
at least one level under another folder.
• 30651523 - Changing database details - You can't change database details for
EPM System and RCU databases after configuration.
• 30647112 - IIS - Using IIS as the Web Server does not work.
Calculation Manager Known Issues
There are no Oracle Hyperion Calculation Manager known issues in Release 11.2.2.
EPM Workspace Known Issues
19
Oracle Hyperion Enterprise Performance Management Workspace Release 11.2.2
includes the following known issues:
• 31475270 -- Files and folders which have Full Control or Modify permissions set
on them cannot have their Name or Description fields edited unless the user has
either the Administrator or Security Administrator role.
• 31463752 -- Imported HTML files render as plain text documents instead of as
properly-formatted HTML files.
• 31379347 -- When you use Chrome/Edge to open Related Content links in a
Oracle Hyperion Financial Reporting report in EPM Workspace, an empty window
is opened instead. The links work correctly if launched from Oracle Hyperion
Financial Reporting Web Studio, or if you are using Mozilla Firefox.
FDMEE Known Issues
There are no Oracle Hyperion Financial Data Quality Management, Enterprise Edition
known issues in Release 11.2.2.
Financial Close Management Known Issues
Oracle Hyperion Financial Close Management Release 11.2.x includes the following
known issue:
30489124 - Issue with Deployment of Forms with Large Entity List. When deploying
a form that contains a large number of entities to collect data for a big data set with
a large number of attributes, the deployment process does not complete in a timely
manner.
Financial Management Known Issues
Oracle Hyperion Financial Management Release 11.2.2 includes the following known
issues:
30589111 - Configuring the Financial Management Database
using an SSL Connection
If you configure the Financial Management database by using SSL connection, an
error occurs while accessing the Consolidation Administration feature. This issue
occurs because the JDBC datasource named "hfm_datasource" that is created during
installation cannot connect to the Oracle database on the SSL-enabled port because
the necessary properties were not added to the datasource during creation.
Workaround: You must manually define the necessary properties for the JDBC
connection using the WebLogic admin console.
1. Log into the WebLogic admin console.
2. Click the Lock and Edit button to make changes to the domain configuration.
3. Select Data Sources in the Services section to display all of the datasources
defined within the domain.
20
4. Click on
hfm_datasource
to edit the datasource configuration.
5. Click the Connection Pool subtab to edit the connection parameters.
6. Add
javax.net.ssl.trustStore={path to the trust store}
to the multiline text
field titled Properties.
7. Add
javax.net.ssl.trustStorePassword={trust store password}
to the
multiline text field titled Encrypted Properties using the Add Securely button.
8. Click Save.
9. Click the Activate Changes button.
10. Click the Lock & Edit button to make changes to the domain configuration.
11. Under Environment, select Server.
12. Select
HFMWeb0
.
13. Select the Control tab.
14. Select an option from the Shutdown drop down list.
15. Select Start when
HFMWeb0
has shut down.
16. Click the check box next to
HFMWeb0
if it is not already checked.
17. Click the Release Configuration button.
As a best practice, you should restart the Financial Management services to ensure
that Financial Management uses the proper datasource definitions.
Additional Known Issues
• 28950275 - The hierarchy indentation is different for a [Base] memberlist in Smart
View.
• 28877861 - The Edit option is disabled for Intercompany templates under
Documents.
• 28706652 - The security class of a data grid changes to [Default] when opened
from a Tasklist.
• 28630845 - HFMCopyApplication_x64 does not work correctly when using the
year filter.
• 28438177 - Setting up related content links does not work correctly.
• 28402997 - You cannot lock NODATA entities after enabling Process Management
mid-year.
• 28297648 - Data Extract may extract line items from unselected custom dimension
members.
• 28192838 - Override parameter settings are not applied due to canonical name
updated in HFM_Parameters.
• 28035961 - Custom links sometimes do not work.
• 27995736 - Calculation Manager rule deployment fails when Financial
Management is not configured on the default port.
21
• 27940401 - Member selector for the Value dimension does not show all members
until you scroll.
• 27839227 - Cell information displays data while the data grid shows invalid
intersections.
• 27837748 - You cannot use the flat file with headeroption when extracting data
using a Task Flow.
• 27673334 - You cannot extract Logon Failure activities through Task Audit.
• 27590946 - The HFM application import process does not complete when using
data filter.
• 27567030 - Extracted data file cannot be loaded again if any cell text was entered
in multiple lines.
• 27280815 - Data Extract with Org by Period changes includes data from an
inactive hierarchy.
• 27076232 - Financial Management needs to be restarted when one of the RAC
nodes goes offline during consolidation.
• 27033226 - You cannot use the mouse wheel to scroll in a data form horizontally.
• 26946722 - Clear invalid record does not clear ownership data in a deleted parent/
child pair.
• 26894565 - A port conflict may cause a Financial Management application to be
inaccessible.
• 26635004 - An error message about “unhandled exception occurred in
CXfmJHsxServerWrapper” occurs when shutting down Financial Management.
• 26548782 - Calculated data cells can be edited in a Data Form opened in Smart
View.
• 26444010 - Financial Management displays incorrect timestamps due to the time
zone for Process Management history.
• 26204796 - An “invalid pointer” error occurs when trying to retrieve data through
Smart View.
• 26193119 - The currency description is missing after a data extract to database.
• 25949243 - Member search is not working in SmartView Data Form member
selection.
• 25926714 - Sorting and grouping is incorrect when drilling down on Financial
Management dimensions in Smart View.
• 25880069 - Smart View incorrectly allows data input if a column has an Override
with a string or blank.
• 25869969 - The Load Data tab does not open after clearing all the data load rows.
• 25861613 - In Extended Analytics, an incorrect error message displays an ODBC
connection error.
• 25784748 - The @Cur function in data forms through Smart View disappears after
adding a member and refreshing.
22
• 25737124 - In Smart View, an unknown error occurs when selecting a member
with a hyphen in the member name in POV Manager.
• 25724727 - Intercompany and Journal Reports in Excel format use an incorrect
format for column width and amount column.
• 25723476 - You cannot delete a row in a journal.
• 25660919 - Users with the View Data Audit role cannot extract data audit files.
• 25598534 - There is no option to specify a decimal character in data extract to a
flat file.
• 25556937 - Overlapping consolidation warning messages are not adisplaying in
some cases.
• 25537482 - Traditional Chinese translation for “Consolidation Administration” is not
consistent.
• 25536667 - You cannot access a journal when EnableMetadataSecurityFilter is
checked.
• 25533359 - The Search Member feature in data forms is only possible using lower
case letters.
• 25480494 - The @Cur override function is not working correctly in data forms.
• 25378272 - Column sorting in the Rules Profiler does not work.
• 25310773 - Financial Management may unexpectedly shut down after using the
HFM Insights.
• 25291675 - No warning message is displayed in Smart View for overlapping
consolidations.
• 25223563 - GetMemberInformation API from MetadataOM returns only a single
description.
• 25176118 - Lifecycle Management import application process does not use data
and index tablespaces.
• 25169567 - You cannot unlock multiple periods in a data grid or form.
• 25168254 - An invalid member error occurs when running an Intercompany report
with a system member list as partner that the user doesn’t have access to.
• 25084474 - When running a journal report, Running Tasks has an empty
description in the activity field.
• 25072792 - Column suppression doesn’t work in Smart View.
• 25062980 - Line item detail input adding up to zero is shown as no data.
• 25041164 - In data forms, submitting data to a specific POV takes longer to
process.
• 24841757 - In the Intercompany Transaction screen, users are not able to set
reason codes through the Set Reason Code action menu.
• 24836868 - Running delete extract from a Taskflow results in an error, even
though the extract was successfully deleted.
• 24824013 - Lifecycle Management application snapshots fail unless the Financial
Management MSSQL user is a member of sysadmin.
23
• 24811074 - FDMEE may attempt to load to the wrong cluster in a multi-cluster
environment.
• 24794995 - An Intercompany Report stops working after a file system limit of
32000 subfolders is reached in the Running Tasks folder.
• 24747566 - In Smart View, member and other text data in adhoc analysis results in
an error.
• 24733397 - Security class extract includes None entries.
• 24716412 - Overlapping consolidations cannot be started from the Actions button
on the Process Control screen.
• 24688632 - In SmartView, you may receive an: invalid session id error if your
session has expired.
• 24672466 - A valid message is missing when loading a memberlist with errors.
• 24667259 - A Smart View performance issue occurs when retrieving data.
• 24659554 - A large number of Invalid session ID error messages display in ODL
log and system messages.
• 24657984 - You cannot add a document to Favorites from a task list.
• 24654126 - Smart View spreadsheet refresh is slower with an Oracle database.
• 24666664 - In Process Control, validation incorrectly passes when the validation
account is not zero.
• 24580610 - Grand total for Entity Transaction, Parent Transaction and
Transactions Difference is missing the Intercompany Report.
• 24513966 - You cannot promote an Entity hierarchy in a phased application using
a Task Flow.
• 24361427 - APIs are needed for system messages.
• 24361232 - You cannot scroll in data forms using Firefox.
• 24339379 - Configure DSN doesn’t have an option to set up Windows
authentication for SQL DB.
• 23858337 - Incorrect decimal and thousand separator characters display when
using graphs.
• 23664657 - Import Application does not copy the sequences.
• 23629019 - Intercompany reports do not complete when running more than one
report at the same time.
• 23513413 - In SmartView, no warning is displayed when a user posts a journal
without saving data first.
• 23510132 -In Data Forms, the display value for all Flow and Balance accounts is
incorrect when scaling is enabled.
• 23498740 - There is no method to enumerate users in the Java API.
• 23483829 - In SmartView, Suppress Column is not working.
• 23325600 – You cannot choose a single dimension member when creating
intercompany reports.
24
• 23320620 - Intercompany reports generated in Excel format are missing the
columns "Partner Amount" and "Difference."
• 23319660 - Intercompany reporting with Internet Explorer 11 generates an error
when using the alert function.
• 23291556 - Journal reports do not retain Entity filters.
• 23265348 - Extracting data through a Taskflow does not include line item details.
• 23250225 - Consolidations started in SmartView are not listed in Running Tasks.
• 23198687 - Consolidations run from Taskflow that take longer than 2 hours are
resubmitted.
• 23171605 - Tasklists with a Japanese name and/or description cannot be loaded.
• 23121161 - Unrecognizable characters may display in extracted HFM rule files.
• 23104733 - When loading documents, it is not possible to change the security
class without selecting the Override Security Class checkbox.
• 23099786 - Suppression options for a parent level member may not work when
running a report through Financial Reporting.
• 23078316 - Smart Viewindentation does not work correctly.
• 23052997 - Extracting Journals with more than one Value member selected
generates an OCBD error.
• 22927729 - Calculation Manager rule deployment from EPMA does not work.
• 22915147 - Calculation status for Entity Currency is displayed incorrectly in cell
information.
• 22891539 - You cannot extract data for dynamic accounts.
• 22886022 - You cannot get aggregation weight of custom dimension members
using the API.
• 22874615 - In SmartView, performing "Zoom In --> All Levels" on ad-hoc grids
causes improper indentation for dimension members in alternate hierarchies.
• 22858287 - In Process Control it is not possible to promote if there is no data in a
period.
• 22826971 - Intercompany reports in Excel format remove leading zeros in entity
names.
• 22824935 - The wrong members are displayed in invalid grid error messages.
• 22811912 - You cannot find artifacts when searching for applications in Lifecycle
Management.
• 22810701 - In SmartView it is not possible to create a private connection using
HypCreateConnection.
• 22513213 - You cannot enter the data in a data form after opening multiple forms
and then closing all but one.
• 22263269 - It is not possible to use SSL-enabled SQL Server.
• 22235950 - You cannot extract data using [ICP Entities].[Base] in the ICP POV
member.
25
• 22121279 - When running a clear data task from Manage Data, it is not possible to
navigate to other tabs until Clear Data is complete.
• 22104972 - Metadata loads without any errors when a new security class is used
that does not exist in Shared Services.
• 22019370 - You cannot export or import artifacts with an apostrophe in the label
using Lifecycle Management.
• 21892878 - Opening a data form when the user has no access to the control
member generates an unknown error.
• 21847984 - Values are truncated in Smart View with Swedish regional settings.
• 21840913 - An issue creating journals in Smart View may occur when the Excel
default language is Swedish..
• 21838501 - When extracting member list and rules files in an EPMA application,
the extracted file is empty.
• 21835771 - After an apparently successful export from FDMEE, the data is not
actually imported.
• 21635491 - The timestamp in the Financial Management data extract log does not
match the real time-of-day or the server time.
• 21458897 - You cannot open an .app format metadata file through the Manage
Metadata option.
• 21417273 - When importing documents folder names that contain a dot or
underscore, the folders are not imported correctly.
• 21270619 - You cannot right-click an artifact to export for edit or import after edit.
• 21080495 - In Smart View, when you open a data form and navigate to Journal
Entity Detail, the time does not display correctly.
• 20989090 - You cannot unlock multiple periods by selecting multiple periods.
• 20981257 - An error occurs when opening a consolidation rule in Calculation
Manager using a non-English local system language.
• 20876914 - Templates with a label only are not listed if Parent or Entity are in the
column.
• 20843618 - You cannot extract cell text unless you are an administrator.
Financial Reporting Known Issues
Oracle Hyperion Financial Reporting Release 11.2.2 includes the following known
issue:
21566566 -- If an entire row is merged in an Financial Reporting report, it will be lost
when exported to Microsoft Excel in Fully Formatted mode.
Planning Known Issues
Oracle Hyperion Planning Release 11.2.2 includes the following known issues:
26
• 31216871—YEARS DIMENSION DISPLAYS VERSION MEMBERS WHEN
NAVIGATE FROM VER DIM TO YEAR IN OUTLINE. When you navigate to the
Years dimension after viewing the Version dimension, the system displays the
Version dimension members under the Years dimension. But if you navigate to any
other dimension and then navigate back to the Years dimension, the correct Years
dimension members are displayed.
Workaround: If the wrong dimension members are displayed under the Years
dimension, click any dimension other than the Version dimension, then view the
Years dimension again.
• 30870289—11.2 HYS9RMIREGISTRY_EPMSYSTEMX
HYPERIONJAVASERVICE.EXE NOT LISTENING TO RMI 11333 PORT. The
Planning RMI Server contains an incorrect reference to JRE 1.6.0 and to
client\jvm.dll
. Only ODI connectivity to Planning and the
cuberefresh
Planning
utility uses RMI, so impact should be low.
Workaround: Set the RMI JVM in the registry to point to
Oracle\Middleware\dbclient32\jdk\jre\bin\client\jvm.dll
which is a 32-bit
jvm.dll
.
Additional Known Issues
• 29869779—ADF ERROR WHEN CREATING COMPOSITE FORM. You can't drag
a simple form to the layout area of a composite form.
• 30382303—ON-PREM - IN CERTAIN CASES ASO FORMULA VALIDATES
SUCCESSFULLY WITH SEMICOLON CHARACTER. A member formula validates
successfully when it shouldn’t in this circumstance: You enter a formula that ends
with a semicolon character for an aggregate storage (ASO) cube.
• 30386969—UI HANGS SAVING A VALUE IN A COMPOSITE DATA FORM. If a
composite form contains duplicate component forms, the user interface freezes
when you save data in the composite form.
Profitability and Cost Management Known Issues
Oracle Hyperion Profitability and Cost Management Release 11.2.2 includes the
following known issues:
• 30856596 -- It can take several seconds to open a Profitability and Cost
Management application or to open the Profitability Applications console,
especially after restarting the Profitability service. With the Chrome and Edge
Chromium browsers, this can result in a pop-up message that the pages aren’t
responding, with an option to wait or to exit the pages. This message can be
ignored – the pages will eventually open as expected.
• 30774386 -- The Job Library screen within an open application and the Job Library
screen in the Profitability Applications console both allow you to export the job
history to an Excel spreadsheet file. The exported file is created in html format. If
you give the file an “.html” suffix when you save it, you will be able to open it in any
browser, in MS Word, MS Excel, or in other programs that handle html files.
• 30772222 -- When exporting a Management Ledger application using Export
Template, if too many POVs are selected, the operation may fail immediately
27
with an error related to job properties. If this happens, you can try selecting
fewer POVs, or you can export the application from the Oracle Hyperion Shared
Services Console.
• 30514802 -- The Internet Explorer browser is no longer supported.
• 30445644 -- For Detailed Profitability applications using SQL Server, the Total
Output and Unassigned Cost values in the Stage Summary section of Stage
Balancing do not display the correct values.
• 30440499, 30462134 -- In APS connection mode on distributed systems, where
Oracle Essbase is installed on a different server from Profitability and Cost
Management, Essbase connection errors can occur during cube deployment,
calculation, rule balancing, and so on if APS is not correctly installed and
configured.
The main requirement here is that for distributed systems, Analytic Provider
Services must also be installed on the Profitability and Cost Management server.
• 30424305 -- After deleting dimension members, the Archive Data and Reload After
Deploy option for redeploying the cube to Essbase and preserving the data is not
guaranteed to always work, depending on how Essbase is able to deal with those
deleted members.
As a workaround, you may have to export all data and remove the data for the
deleted members and then reload the data in a separate step after deploying the
cube without the Archive Data and Reload After Deploy option selected.
• 30385318 -- When a Standard or Detailed application that was created using the
Master Cube method is duplicated, the Profitability and Cost Management service
may need to be restarted before the cube in the duplicated application can be
successfully deployed to Essbase.
• 25468999 -- When invoking Oracle Smart View for Office from Manage Queries,
you may encounter errors such as: "connection refused" and "Web launch
operation cancelled".
Oracle recommends the Full SSL Deployment of EPM System as described by the
Oracle Enterprise Performance Management System Security Configuration Guide
to support invoking Managed Queries from Management Ledger with SSL. If you
terminate SSL at the OHS server, then additional configuration may be required
within the OHS configuration files.
• 24927444 -- For Standard and Management Ledger applications, selecting
Suppress #Missing in a Query definition returns the error "Cannot perform cube
view operation.null". If you deselect this option, the query runs and you can see
data along with missing data rows.
• 23512869 -- For Management Ledger Applications, LCM Export includes a
Metadata folder which contains two artifacts: ApplicationData and Dimensions.
Only the Dimensions artifact is supported for this release. For correct operation of
LCM Export, you must deselect ApplicationData.
To import, you must pre-create the application in the Profitability Applications
console, then you can import into it. When importing, you can select the
Dimensions artifact; do not select the ApplicationData artifact.
• 20550180 -- In an Enterprise Performance Management (EPM) compact
deployment installation, persistence messages from Profitability and Cost
28
Management and from other EPM products that use EclipseLink technology are
being redirected to the
hpcm.log
file.
See "Creating a Separate Log File for Persistence Messages" for instructions in
editing the
logging.xml
file to redirect these messages to a separate log file.
• 20421528 -- For Management Ledger applications using the "APS" connection
type, the Cells Updated statistic is missing from the Execution Statistics system
report. Oracle strongly recommends you use the "Embedded" Essbase connection
type.
Shared Services Known Issues
Oracle Hyperion Shared Services Release 11.2.2 includes the following known issue:
Lightweight Directory Access Protocol Channel Binding for Microsoft Active Directory
Hardening
The default configurations for Lightweight Directory Access Protocol (LDAP)
channel binding and LDAP signing has known vulnerabilities that let LDAP clients
communicate with them without enforcing LDAP channel binding and LDAP signing.
Microsoft recommended safe default configurations for LDAP channel binding and
LDAP signing on Active Directory Domain Controllers that supersedes the default
unsafe configurations are available in ADV190023 Microsoft Guidance for Enabling
LDAP Channel Binding and LDAP Signing.
Oracle recommends that Oracle Enterprise Performance Management System
deployments that use MSAD follow the procedures in the Microsoft advisory to
manually update LDAP channel binding and LDAP signing configurations until a fix
is available from Microsoft.
After manually updating LDAP channel binding and LDAP signing configurations on
the MSAD server, use only SSL connections in EPM System to access MSAD.
Tax Governance Known Issues
There are no Oracle Hyperion Tax Governance known issues in Release 11.2.2.
Tax Provision Known Issues
There are no Oracle Hyperion Tax Provision known issues in Release 11.2.x.
Tips and Troubleshooting
Tips and troubleshooting topics are listed in the Installation and Configuration
Troubleshooting Guide.
All Oracle Enterprise Performance Management System 11.2.0 guides are available in
the library on the Oracle Help Center: https://docs.oracle.com/en/applications/?tab=8.
Documentation Updates
29
Related Topics
• Accessing EPM System Product Documentation
Accessing EPM System Product Documentation
Find the latest Oracle Enterprise Performance Management System product guides
in the Oracle Help Center (https://docs.oracle.com/en/). To access documents to view
or download, click the Applications icon. In the Applications Documentation window,
select the Enterprise Performance Management tab, and then look for your release in
the Enterprise Performance Management list.
You can also find deployment-related documentation on the Oracle Technology
Network (http://www.oracle.com/technetwork/index.html) and on the Oracle Software
Delivery Cloud website (http://edelivery.oracle.com/EPD/WelcomePage/get_form).
Oracle
®
Enterprise Performance Management System Readme
F32147-01
Copyright
©
2020, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property
laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute,
exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for
interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is
applicable:
U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered
hardware, and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S. Government end users are
"commercial computer software" or “commercial computer software documentation” pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental
regulations. As such, the use, reproduction, duplication, release, display, disclosure, modification, preparation of derivative works, and/or adaptation of i) Oracle programs
(including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs), ii) Oracle
computer documentation and/or iii) other Oracle data, is subject to the rights and limitations specified in the license contained in the applicable contract. The terms governing the
U.S. Government’s use of Oracle cloud services are defined by the applicable contract for such services. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous
applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take
all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by
use of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Inside are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks
of SPARC International, Inc. AMD, Epyc, and the AMD logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open
Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates
are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable
agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of
third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?
ctx=acc&id=docacc.
Access to Oracle Support
Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/
lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.
To provide feedback on this documentation, send email to [email protected], or, in an Oracle Help Center topic, click the Feedback button located beneath the Table of
Contents (you may need to scroll down to see the button).
Follow EPM Information Development on these social media sites:
LinkedIn - http://www.linkedin.com/groups?gid=3127051&goback=.gmp_3127051
Twitter - http://twitter.com/hyperionepminfo
30
