FASTENING AND TERMINATION BARS
TECHNICAL DATA BULLETIN
A SINGLE SOURCE FOR SINGLE-PLY ROOFING
Versico, PO Box 1289, Carlisle, PA 17013
Tel: 800.992.7663 Fax: 717.960.4036 Web: www.versico.com
© 2018 Versico 10.03.18.
Polymer Fastening Strip
Typical Properties and Characteristics
Material Engineered Polymer
Dimensions 1" (25 mm) wide x 250' (76 m) long
Packaging 250 lf (76 m) per carton
Weight 10 lbs (5 kg) carton
Recycled Content 49% pre-consumer recycled content
Manufacturing Location Cleveland, OH
Metal Fastening Bar
Typical Properties and Characteristics
Material Galvalume Coated Metal
Dimensions 1" (102 mm) wide x 10' (3 m) long
Packaging 50 pcs; 500 lf (152 m) per carton
Weight 85 lbs (39 kg) carton
Recycled Content
0% pre-consumer recycled content
Manufacturing Location Addison, IL
Termination Bar
Typical Properties and Characteristics
Material 6036-T6 Extruded Aluminum
Dimensions 1" (25 mm) wide x 10' (3 m) long
Packaging 50 pcs; 500 lf (152 m) per carton
Weight 69 lbs (31 kg) carton
Recycled Content
0% pre-consumer recycled content
15% post-consumer recycled content
Manufacturing Location Cleveland, OH
Ballast Retaining Bar
Typical Properties and Characteristics
Material 6036-T6 Extruded Aluminum
Dimensions 4" (102 mm) wide x 10' (3 m) long
Packaging 25 pcs; 250 lf (76 m) per carton
Weight 123 lbs (56 kg) carton
Polymer Fastening Strip
The Polymer Fastening Strip is an engineered polymer bar
that is used to mechanically attach EPDM membranes per
Versico Specifications. The bar is packaged in a 1" x 250'
coil that has pre-punched holes every 3" on center. The strip
can be easily cut to any desired length. When installing,
make sure that all corners of cut strip are rounded. Install
the strip using HPV or HPVX Fasteners.
Metal Fastening Bar
The Metal Fastening Bar is a Galvalume
™
coated metal
that is used to mechanically attach EPDM membranes
per Versico Specifications. The bar is packaged in 1" x 10'
lengths, 500 linear feet per package and has pre-punched
holes every 6" on center. The bar can be easily cut to any
desired length. When installing, make sure that all corners of
cut bar are rounded. Install the bar using HPVX Fasteners.
Termination Bar
The Termination Bar is an extruded aluminum bar that is
designed for securing and sealing compression type flashing
terminations per Versico Specifications. The bar is packaged in
1" x 10' lengths, 500 linear feet per package and has pre-punched
holes every 6" on center. This bar features a top edge for ease of
applying Versico’s Lap Sealant for EPDM installations or Universal
Single Ply Sealant for TPO, PVC, and KEE HP installations. The bar
can be easily cut to any desired length. When installing, make
sure that all corners of cut bar are rounded. Install the bar
using HPVX Fasteners, or Term-Bar Nail-In Fasteners.
Ballast Retaining Bar
The Ballast Retaining Bar is an extruded aluminum bar that
is designed as a ballast retaining perimeter securement
system, which comes packaged in 4" x 10' lengths, 250
linear feet per package. The ballast retaining bar has pre-
punched holes every 6" on center for installation, and also
has pre-punched drainage holes every 4" on center.
Versico and the Versico logo are trademarks of Versico.
LEED is a registered trademark of the U.S. Green Building Council.
