5. With your needle in the down position, pivot the face mask and sew a parallel line of stitching that
is approximately 4 inches long, or until you reach your marked pin point. STOP...you have 2 choices
here:
a. With your needle down, lift the presser foot and holding the nose guard wire, slide your hand
through the cotton T-shirt jersey knit pocket and guide the wire nose guard into the channel. It
takes a little finesse and bit of patience, once it's in the channel you can use a pencil or knitting
needle to nudge it along. When it's seated in the channel, pivot the mask, lower the presser
foot and stitch the channel closed.
b. Take the mask out from under the sewing machine, slide the wire nose guard into position,
and then return the mask to the sewing machine and stitch the channel closed.