48381 - UHU HOT MELT GLUE GUN PROMATIC BLISTER MULTI LANGUAGE
GLUE GUN SUPER / PROMATIC
GLUE GUN FOR DO-IT-YOURSELF AND SEMI-PROFESSIONAL USE
PRODUCT DESCRIPTION
Glue Gun for do-it-yourself and semi-professional use.
FIELD OF APPLICATION
Glues many porous and non porous materials in seconds such
as wood, metal, stone, glass, tiles, ceramic, leather, textiles and
many plastics. With a high meltig capacity and is suited for DIY
and all household repairs. Glues almost all materials quickly,
neatly, permanently and reliably. Ideal for fixing, repairing,
isolating and sealing. For example carpets, shoe soles and
heels, mounting laths, skirting boards or glueing a loose tile.
Multifunctional.
Not suitable for PE, PP, PTFE, as well as heat sensitive materials.
Supporting elements or objects permanently under tension.
PROPERTIES
· Melting Temperature: 190 °C
· Flow of glue: 20g/min
· Power: 60W
· Strong, fast and simple
· Transparent
· Weather resistant
· Temperature resistant up to +70 °C
· Does not shrink, does not age
· Solvent-free
· Resistant to UV-light
· Good electrical insulating capacity
· Crack filling
PREPARATION
Working Conditions: When using this hot melt glue gun, always
follow basic safety precautions. This will reduce the possibility of
accidental injury due to burs or electrical shock.
Personal safety: Contact with hot nozzle or molten glue can
cause burns. Always keep device out of reach of children.
Never try to speed up cooling process by holding gun under the
tap. Always allow to cool naturally. Check cord regularly for
damages or ruptures. For safety reasons, do not use glue gun if
damaged.
Surface Requirements: The areas to be glued must be dry and
free of any dust or grease.
APPLICATION
Directions for use:
When using this hot melt glue gun, always follow basic safety
precautions. Put gun in clamp and plug in the outlet. Insert glue
stick Ø 11 mm into glue gun and allow to warm up for 5 - 8
minutes. Squeeze trigger to apply glue on the harder material
and do not apply to thinly. Press parts firmly within 15 - 20
seconds. The connection is solid and can be loaded within 2
minute (depending on thickness of glue layer). The final bond
strenght is reached after 2 hours. Important: Timely insert a new
glue stick behind the old one in order to avoid overheating.
Avoid contact with hot nozzle. When gun is not in use for 60
minutes or longer, unplug cord from the outlet. Apply the glue
in beads on flexible materials and in beads or dots on hard
materials. Larger surfaces are difficult to bond because glue
may solidify before applied to entire surface. Bonding strenght
is the best when the parts are joined as soon as the glue is
applied. After loading a new cartridge, instead allow the gun to
heat up again.
Stains/residue: Cured adhesive residue can only be removed
mechanically.
Points of attention: This tool must be placed on its stand when
not in use. It is for indoor use only. Never leave the glue gun
unattended if it is still hot or connected to supply mains. Some
materials are heat-sensitve and can be damaged by the hot
nozzle or even the hot glue. Never remove glue sticks from
glue gun, this could damage the mechanism. Never insert other
objects into the glue gun than the recommended glue sticks. Be
careful when using the glue gun near to combustible materials.
Do not use the glue gun in explosive environments.
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products
are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is
always at your disposal for any advice needed.
UHU GmbH & Co. KG 77815 Bühl (Baden) Tel.: +49 7223 284-0 Fax: +49 7223 284-500 www.uhu.com 1
20240221
48381 - UHU HOT MELT GLUE GUN PROMATIC BLISTER MULTI LANGUAGE
GLUE GUN SUPER / PROMATIC
GLUE GUN FOR DO-IT-YOURSELF AND SEMI-PROFESSIONAL USE
TECHNICAL SPECIFICATIONS
Chemical base: Ethylene vinylacetate copolymer
Colour: Transparent
Colour after curing/drying: Transparent
Filling capacity: Very good
Insulating: Good
Melting temperature
Minimum:
180
Melting temperature
Maximum:
200 °C
Maximum temperature
resistance:
70 °C
Open time approx.: 30 seconds
Solvent free: Yes
PACK SIZES
Glue Gun with 11mm hot melt glue sticks
STORAGE CONDITIONS
After use, allow glue gun to cool completely prior to storage.
When not in use, the glue gun should be stored in dry and
secure location out of the reach of children.
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products
are applied, we assume no responsibility for the results obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is
always at your disposal for any advice needed.
UHU GmbH & Co. KG 77815 Bühl (Baden) Tel.: +49 7223 284-0 Fax: +49 7223 284-500 www.uhu.com 2
20240221
